Milling

Milling Washers, Vices, Milling Washers Set of 24 Pairs 125mm Dimensions of Single Washers: 8 x (11, 16, 21, 26, 31) , 36mm) 10 x (13, 18, 23, 28, 33, 38mm) 12 x (15, 20, 25, 30, 35, 40mm) , 32, 37, 42mm) Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 150 mm Home washers Dimensions: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x26, 8x28, 8x30, 8x32, 8x35, 8x40, 8x45, 8x50 mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Home Intake / clamp / end pin stopwatch tool taper ISO 30 (7:24) for the automatic exchange / pull plug, M12 screw, M12x30 ° MAS BT30 x 30 ° / MAS BT30 x 60 < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peg Angle (Upper): 30 ° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2 : 23mm l3: 18mm a °: 60 ° JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 < br> - according to EN: 41Cr4

MAS BT30 x 45 ° Bottom part): 45 ° Peak angle (top): 30 ° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2: 23mm l3: 18mm a °: 45 ° Norm: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

BT40 x 30 ° MAS BT40 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT40 x 45 ° - Bottom part): 45 ° Peak angle (top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm < br> l3: 28mm a °: 60 ° Norm: JIS B 6339, MAS403-1982 Suitable for eg HAAS Material: - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

Clamping / clamping / end screw for tool shank with taper ISO 40( 7:24) for automatic change / pull pin, screw M16, M16x45 ° with coolant hole - drilled LAG BT40 x 45 °, abbreviated Top angle 28% bottom): 45 ° ° Top angle Angle 28 top 28 ): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a °: 45 ° < br> Standard: JIS B 6339, MAS403-1982 Suitable eg. for HAAS / HURCO Material: - according to ČSN: 14 140 - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT40 x 45 °, 45 ° Peak angle (top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a °: 45 ° Norm: JIS B 6339, MAS403-1982 Suitable for eg HAAS Material: br> - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

BT40 x 45 ° MAS BT40 x 45 °, sealed with a hole for cooling Top angle of the pin (bottom): 45 ° Top pin angle (top): 30 ° d1: 15mm d2: 10mm d3: 17mm < br> l1: 60mm l2: 35mm l3: 28mm a °: 60 ° Standard: JIS B 6339, MAS403-1982 | Suitable for eg HAAS Material: - to DIN: 41Cr4 / 42Gr4 - to EN: 41Cr4

Clamping / clamping / end screw for tool shank with taper ISO 40(7: 24) for automatic exchange / pull pin, screw M16, M16x45  ° with seal, with hole - drilling MAS BT40 x 45  ° seal with hole for cooling Top angle of the pin(lower parts): 45  °  ° Top angle of the pin( upper part): 30  ° to d1: 15mm to d2: 10mm to d3: 17mm to l1: 60mm to l2: 35mm to l3: 28mm  °: 60  ° Standard: JIS B 6339, MAS403-1982 Suitable for. for HAAS Material: - according to ÄOSN: 14 140 - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT50 x 30 ° / MAS BT50 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT50 x 45 ° MAS BT50 x 45 ° Pin Head Bottom part): 45 ° Peak angle (top): 30 ° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm < br> l3: 35mm a °: 45 ° Norm: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4