Milling

Varnished wooden binder for ER 16 collet 12 holes

Colored wooden binder for ER 25 collet 16 holes

Varnished wooden binder for ER 32 collet 18 holes

Varnished wooden binder / base for ER 40 collet 23 holes

Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 80 mm Home washers Dimensions: 4x14, 4x16, 4x18, 4x20, 4x22, 4x24, 4x26, 4x28, 4x30, 4x32, 4x35, 4x40, 4x45, 4x50 mm Accuracy: 0,01mm Work surface area: 0,005mm Hardness 55 HRC

Set of 14 pairs, 10x30, 10x32, 10x35, 10x40, 10x45, 10x50 mm Accuracy: 0,01mm Work surface area: 0,005mm Hardness 55 HRC

Threaded nut for collet chuck ER 25 Outer diameter: 42mm Nut width: 20mm Inner diameter (threaded): 30,5mm Thread M32x1,5 < br> Opening: 21,4mm Matrix has internal bearing and gasket to prevent dust and dirt from entering the collet / clamps DIN6499 Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture.

Reducing sleeve for short cutter, ISO40 / ISO30, ISO40 / 30 ISO40 outer shear cone ISO30 inner straight cone Overall length (without stones): 110mm < br> For tools according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

ISO50 / ISO30, ISO50 / 30 < br> For instruments according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40 External steep cone ISO50 (without thread, through reduction) Internal steep cone ISO40 Total length (without drift stones): 150mm For tools according to DIN2080 and JIS B 6339 /MAS BT/ Standard: ČSN 241480

SK Carbide / Carbide Cutter Material: TK (SK) Type: Taper Shaft - KEL Type Cutter Diameter: 10mm Cutting Length: 20mm Overall Length: 60mm Diameter of chucking stem: 6mm Application: Cross teeth are suitable for machining difficult to process materials Highly alloyed steel, cast iron, stainless steel, refractory steel < br> Suitable for chamfering, deburring, deburring, surface repair after welding, surface shaping Cat. No .: 21125087