Milling

Colored wooden binder for ER 25 collet 16 holes

Varnished wooden binder for ER 32 collet 18 holes

Varnished wooden binder / base for ER 40 collet 23 holes

Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 80 mm Home washers Dimensions: 4x14, 4x16, 4x18, 4x20, 4x22, 4x24, 4x26, 4x28, 4x30, 4x32, 4x35, 4x40, 4x45, 4x50 mm Accuracy: 0,01mm Work surface area: 0,005mm Hardness 55 HRC

Set of 14 pairs, 10x30, 10x32, 10x35, 10x40, 10x45, 10x50 mm Accuracy: 0,01mm Work surface area: 0,005mm Hardness 55 HRC

Threaded nut for collet chuck ER 25 Outer diameter: 42mm Nut width: 20mm Inner diameter (threaded): 30,5mm Thread M32x1,5 < br> Opening: 21,4mm Matrix has internal bearing and gasket to prevent dust and dirt from entering the collet / clamps DIN6499 Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture.

Reducing sleeve for short cutter, ISO40 / ISO30, ISO40 / 30 ISO40 outer shear cone ISO30 inner straight cone Overall length (without stones): 110mm < br> For tools according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

ISO50 / ISO30, ISO50 / 30 < br> For instruments according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40 External steep cone ISO50 (without thread, through reduction) Internal steep cone ISO40 Total length (without drift stones): 150mm For tools according to DIN2080 and JIS B 6339 /MAS BT/ Standard: ČSN 241480

SK Carbide / Carbide Cutter Material: TK (SK) Type: Taper Shaft - KEL Type Cutter Diameter: 10mm Cutting Length: 20mm Overall Length: 60mm Diameter of chucking stem: 6mm Application: Cross teeth are suitable for machining difficult to process materials Highly alloyed steel, cast iron, stainless steel, refractory steel < br> Suitable for chamfering, deburring, deburring, surface repair after welding, surface shaping Cat. No .: 21125087

Collet holder HSK F 63 ER 40 - 75 mm Type HSK F63 ER40 AD - cooling guided through the center Length from cone to holder: 75mm Max. collet size: 30mm For collets with outer diameter: 40mm Diameter of clamping nut: 62mm Clamping stem design for aut. replacement: DIN69893 F ER40 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip) Cat. no.: F63.02.26