Milling

Milling Washers, Vices, Milling Washers Set of 8 Pairs 160mm Length Washer Size: 8x12; 8x17; 8x22; 8x25; 8x28; 8x32; 8x36; 8x38mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Milling Washers, Vices, Milling Washers 8x17mm 8x22mm 8x25mm 8x28mm 8x32mm 8x36mm 8x38mm 8x43mm Accuracy: 0,01mm Hardness 55 HRC

Force screw in the knife holder. Thread Size: M4 Head: TORX 15 Overall length (with head): 8mm

Set of straight collets Set contains collets: 3/4/5/6/8/10/12/14/16/18/20/22/24/25 mm Morse taper: MK 4 Internal thread collet: M16 Usage: For direct clamping !Machine with a cylindrical shank

ISO40 / ISO30, ISO40 / 30 For tools according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

ISO50 / ISO30 Straight Straightener ISO50 Straight Straight Cone ISO30 Inner Straight Cone Overall Length (without Stones): 122mm For Tools By Standard DIN2080 and JIS B 6339 / MAS DIN standards now available in electronic format (PDF) ČSN 241480

ISO50 / ISO40, ISO50 / 40 ISO50 / 40 ISO50 Straight Taper Cone ISO40 Inner Taper Cone Overall Length (without Stones): 122mm < br> For tools according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

Honeycomb cutter Three-sided, non-symmetrical, for machining in three axes Material K30: for machining materials that produce a short, crumbly chip. Especially for gray cast iron, non-ferrous alloys, non-metallic materials Diameter 10mm Shank diameter: 12mm Overall length: 83mm Cutter length: 26mm

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Application: Cast iron: K25 Sale, in stock 30 pcs as of May 22, 2017, when the set is taken off possible discount. Min. 10pcs.

Reducing insert - reduction for milling machine through short, ISO50/MK5, ISO50/5 Outer steep taper ISO50 Inner steep taper morse 5 Total length: 150mm For tools - milling cutters or other reduction bushings with MK5 cone Standard: old Czech milling reduction - custom production 19xx, predecessor of ČSN 241481 Also applicable for DIN2080 - manual tool change (through reduction)