Milling arbors

Long milling mandrel with Morse taper for clamping cylindrical / disc cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241433 / CSN 24 1433 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the bearing surface of the socket cutter: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Internal cooling AD/B (yes / no): depending on the selected variant Other dimensions - see attached photo Standard: DIN 69871, ČSN 247227 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

Milling mandrel for clamping a milling head / milling cutter with an external thread Clamping cone: according to the selected variant Thread size for the cutter: according to the selected variant Length from the collar to the clamping part of the cutter: according to the selected variant Other dimensions: see attached photo Standard: DIN69871 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Other dimensions: see product description for individual variants Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Other dimensions - see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

Milling mandrel for clamping a milling head / milling cutter with an external thread Clamping cone: according to the selected variant Thread size for the cutter: according to the selected variant Length from the collar to the clamping part of the cutter: according to the selected variant Other dimensions: see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel, mandrel for attaching socket cutters, for socket cutters with clamping on stones Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Other dimensions: see product description for individual variants Standard: PN241441 Suitable for older (Czech) spindles of milling machines, where the tool is carried over the nut in addition to the thread.

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions - see attached photo The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen Standard: DIN6358

Milling mandrel with conical shank for cylindrical end mills, mandrel for holding cutters Clamping Morse cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241413 The goods come from excess stock, unused

Milling mandrel with pen and spacers / spacer rings Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions: see product description for individual variants * To mount machine saw blades, it is necessary to remove the drive pin.