Metal drills, cylinder. stalk
-
Steel drills (HSS)
-
HSSCo5 drills
-
HSSCo8 drills
-
Drills for soft materials
-
Special drills
-
With soldering TK slice
-
Carbide drills
-
Drill sets
-
Drills for bent taps
-
Drill files
-
Countersinks - bits for drills
-
Set of drills 3-10mm with soldered SK blade TP320
Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 3/4/5/6/7/8 / 10mm pr. 3 x 19x51mm dia. 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 7 x 47x87mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320
On request82,98 € with VAT -
Set of universal drills 1.0-10.0mm HSS with stepped lead, ProfiLine Tornado, ZPS
* New item *Set of 19 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-10.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064019
In stock95,92 € with VAT -
Set of universal drills 1.0-13.0mm HSS with stepped lead, ProfiLine Tornado, ZPS
* New item *Set of 25 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-13.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064025
In stock194,97 € with VAT -
Collet chuck W16-ER11-150L with cylindrical shank
ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.
In stock41,58 € with VAT