Drills
-
Metal drills, cylinder. stalk
-
Drills for metal, cone. stalk
-
Metal drills, 6hr shank
-
Core and core drills
-
VBD drills
-
VBD for drills
-
Step drills for metal
-
Centering drills - drills
-
Two-stage drills
-
Passivated HSS drill for metal, ČSN 221121
Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
from 0,23 € with VAT -
Grinded drill bit for metal HSS DIN338, 338RNHSS
Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze
from 0,44 € with VAT -
Grinded drill bit for metal HSS TiN DIN 338, 338RNHSS TiN
Coated right-cut ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - see attached photo for lengths Blade angle: 118° Helix angle: 25-30° Material: HSS - High-speed steel Coating: TiN - Titanium Nitride Standard: DIN338 (replaces PN 2907 / PN2907) Usage : General - hand, stand, column drills Unalloyed and alloyed steel, cast steel with a strength of up to 900 N/mm2 Gray malleable cast irons, sintered ductile irons, short chip aluminum alloys, bronze
from 2,08 € with VAT -
Cobalt drill for metal HSSE Co5 DIN338, 338RTIHSSCo5
Right-handed ground spiral cobalt drill for stainless steel with reinforced core and cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 130 ° Helix angle: 36 ° Material: HSSE - High speed steel + Co5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile.
Price - On request -
3-pointed HSSE Co5 metal drill bit DIN338 , ProfiLine Vision , PTG
* New item *3-edged right-cut ground spiral cobalt drill bit for steel and stainless steel with cylindrical shank Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths Material: HSSE - High speed steel + Co5 / HSSCo5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage : Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages : Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
from 2,78 € with VAT -
Cobalt drill for metal HSSCo8 PN2906, 338RNHSSCo8, StimZet
Right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Edge angle: 128 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 25-30 ° Material: HSSE - High speed steel + Co8 Standard: DIN338 (replaces PN 2906 / PN2906) Usage: General - hand, stand, column drills Titanium alloys Austenic steels resistant to corrosion, acids and heat High-strength and low-tensile steels with tensile strength up to 1200MPa Hardox 450 and Hardox 500 Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile. * Possibility of delivery with TiN or TiAlN coating.
from 2,12 € with VAT -
Carbide drill 3xD TiAlN 118 ° DIN6539 / DIN1897, CERANIT
Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 3D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)
from 4,82 € with VAT -
Carbide drill 8xD TiAlN 118 ° DIN6539 / DIN1897, CERANIT
Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 8D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)
from 5,07 € with VAT -
Carbide drill 3xD TiAlN 140 ° DIN6539, TRITON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 2,26 € with VAT -
Carbide drill 3xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine grain K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 0,99 € with VAT