Homepage Metalworking tools Drilling Drills Drills for metal, cone. stalk

Drills for metal, cone. stalk

Product count: 19
  • Metal drill with taper shank ČSN 221140

    Metal drill with taper shank ČSN 221140

    Taper shank drill, blackened, wrought Clamping shank: morse taper Material: HSS - high speed steel Standard: ČSN 221140

    from 4,92 € with VAT
  • Taper shank drill HSSCo5, ČSN 221143

    Taper shank drill HSSCo5, ČSN 221143

    Drill with conical shank Average: according to the selected variant Material: HSSCo5 Standard: ČSN 221143, DIN345

    from 10,22 € with VAT
  • Metal drill with brazed SK blade TP330, taper shank

    Metal drill with brazed SK blade TP330, taper shank

    Drill with taper shank and brazed TK insert, TP 330 Clamping shank: morse Edge angle: 118 ° Helix angle: 15 ° ÷ 30 ° Suitable for drilling in steel, cast iron and stainless steel Standard: PN 221330 / PN221330 / PN 1330

    from 17,55 € with VAT
  • Milled drill bit for metal with taper shank ČSN 221140, StimZet

    Milled drill bit for metal with taper shank ČSN 221140, StimZet

    Drill with conical shank, morse taper Length of drills - see attached table Clamping shank: morse taper Helix: 25 to 30 ° Top angle: 118 ° Drilling depth: 5xD Material: HSS Drill production technology: milled / blackened Standard: ČSN 22 1140 / DIN345 RN Usage: Powerful drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steels, aluminum alloys with short chips, bronze.

    from 10,67 € with VAT
  • Wrought drill bit for metal with taper shank ČSN 221140, StimZet

    Wrought drill bit for metal with taper shank ČSN 221140, StimZet

    Drill with conical shank, morse taper Length of drills - see attached table Clamping shank: morse taper Helix: 25 to 30 ° Top angle: 118 ° Drilling depth: 5xD Material: HSS Drill production technology: wrought / blackened Standard: ČSN 22 1140 / DIN345 RN Usage: Drills recommended for common drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steels, aluminum alloys with short chips, bronze, tough brass, etc.

    from 11,75 € with VAT
  • Taper shank drill HSSCo5, CSN 221143, StimZet

    Taper shank drill HSSCo5, CSN 221143, StimZet

    Drill with conical shank Average: according to the selected variant Material: HSSCo5 Drill dimensions - see enclosed catalog sheet Helix angle: 25 ° - 30 ° Top angle: 128 ° Podbrus: C Standard: 221143 / DIN 345 RN

    from 15,35 € with VAT
  • Taper shank drill HSSCo8, CSN 221146, StimZet

    Taper shank drill HSSCo8, CSN 221146, StimZet

    Taper shank drills with a steep helix and a large core thickness with a special blade - they are less sensitive to breakage. Average: according to the selected variant Material: HSSCo8 Drill dimensions - see enclosed catalog sheet Helix angle: 10 ° - 15 ° Top angle: 128 ° Podbrus: Form C for drills pr. 10.0 - 40.0 mm and Form A for drills dia. 41.0 - 50.0 mm Production method: milling Standard: ZVSE 221146 Usage: For difficult to machine materials Hardox 450 and Hardox 500 Armored plates Drills have increased heat resistance

    from 66,13 € with VAT
  • Taper shank drill HSSCo8, ČSN 221148, StimZet

    Taper shank drill HSSCo8, ČSN 221148, StimZet

    Drill with conical shank Average: according to the selected variant Material: HSSCo8 Drill dimensions - see enclosed catalog sheet Helix angle: 25 ° - 30 ° Top angle: 128 ° Podbrus: C Standard: 221148 / DIN 345 RN High-performance drill with increased heat resistance designed for drilling difficult-to-machine materials. Co8 drills have better heat resistance than Co5 drills. They are very hard, wear-resistant, but also very fragile! Require higher system rigidity: machine -> tool -> workpiece Usage: Steel with strength over 1200MPa Stainless steel Cast iron Aluminum and alloys Copper and alloys Heat-resistant steel HARDOX 400 and HARDOX 500

    from 16,78 € with VAT
  • Extra long HSS drill with taper shank DIN341 / STN 221150 , Zbrojovka

    Extra long HSS drill with taper shank DIN341 / STN 221150 , Zbrojovka

    Extended drill with conical Morse shank Average: according to the selected variant HSS material Clamping shank: morse taper Standard: ČSN 221150

    from 3,21 € with VAT
  • Metal drill with brazed SK blade, conical shank - final sale

    Metal drill with brazed SK blade, conical shank - final sale
    Clearance sale

    Drill with conical shank and soldered TK insert Clamping shank: morse Suitable for drilling in steel, cast iron and stainless steel Standard: PN 221330 / PN221330 / PN 1330

    from 10,16 € with VAT
  • Extra long HSS drill with taper shank DIN341 / ZV5001 , StimZet

    Extra long HSS drill with taper shank DIN341 / ZV5001 , StimZet

    Exrta long drill with taper shank, morse taper Average: according to the selected variant Overall length / helix: according to the selected variant Cone: see product description for individual variants Helix: 25 to 30 ° Top angle: 118 ° Podbrus type C Drilling depth: 5xD Material: HSS Drill production technology: milled / blackened Standard: ZV5001 / DIN341 / DIN 1870 RN / replacement for ČSN 221150 Usage: Extra long drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, steel castings up to 900N / mm2, gray, malleable and ductile iron, sintered steel, etc. When drilling deep holes, it is necessary to prevent clogging of grooves by frequent by rinsing the drilled hole. Due to the poor supply of cutting fluid, it is necessary to reduce the recommended cutting conditions.

    from 37,20 € with VAT
  • Drill 1 1/2 "(38.1) mm with taper shank ČSN 221155

    Drill 1 1/2 "(38.1) mm with taper shank ČSN 221155

    Taper shank drill Diameter 1 1/2 "(38.1 mm) Taper MK4(morse IV) HSS material Standard: A„ A’SN 221155 - Total length / Helix: 390 / 245mm Czech production New, unused drill

    On request
    47,96 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Drills for metal, cone. stalk