Metal drills, cylinder. stalk

Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 3/4/5/6/7/8 / 10mm pr. 3 x 19x51mm dia. 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 7 x 47x87mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320

Countersinks for wood, plastic, acrylic, etc. For drills with diameter: 3,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 4,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 5,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 6,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 8,0mm Max. Recess Diameter: 20mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 10,0mm Max. Recess Diameter: 20mm Suitable for countersinking, for recessed head screws - screws

Set of 19 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-10.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064019

Set of 25 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-13.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064025

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Practical Hinged Pivot Wrench for 10mm and 12mm Screws Material: Cr-V, Chrom-Vanadium