Metal drills, cylinder. stalk

Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 130 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: production standard Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S10122

Carbide drill SK / TK / HA / PVD for aluminum, non-ferrous metals and plastics Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 5D Other dimensions - see the attached catalog sheet Diameters that you only found in the catalog sheet are made to order. Tip angle: 140° Coating: ZrN - Coating with high corrosion resistance and high resistance to adhesion of non-ferrous metals. Machining Al alloys with a lower Si content, or machining of plastics and copper. Standard: DIN6535 HA (smooth shank) Usage : Aluminum, Al-alloys, copper, brass, bronze, plastics and other non-ferrous metals Aluminium, Al-Si alloys (Si < 6%) up to 400 MPa Al-Si alloys (Si < 12%) up to 600 MPa Aluminum alloys ( Si > 12% ) up to 600 MPa Copper, copper alloys, brass and bronze up to 800 MPa Plastics up to 300 MPa Cat. No. - series: S10132 ZrN

Carbide drill SK / TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Catalog number: S10222

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 8D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Multi-purpose right-cut ground twist drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths The graduated tip is from a diameter of 2.5 mm From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages : Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 90 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 120 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Right-cut ground carbide extended NC drill with cylindrical shank Drilling diameter: according to the selected variant Total length: 120mm Blade angle: according to the selected variant Helix angle: 30° Material: Carbide - carbide / carbide K20 / K30, DIN6535 No coating Usage : Special drill for positionally accurate and fast drilling on NC / CNC machines, coordinate boring machines, etc. For centering and chamfering the edge of a thread hole in one operation If you need a different diameter, length or angle, ask us, we will be happy to offer.

Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 12D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Right-handed ground short spiral NC drill for steel with cylindrical shank Edge angle: 90 ° Helix angle: 25-30 ° Material: HSSCo5 (High speed steel HSSE, ie HSS + 5% Co) Standard: ČSN 221185 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. The drill is used on NC machines for drilling holes in materials such as steel, stainless steel, composites, inconel, brass, titanium, aluminum alloys, plastics or wood. It can also be used for chamfering and deburring.