Metal drills, cylinder. stalk
-
Steel drills (HSS)
-
HSSCo5 drills
-
HSSCo8 drills
-
Drills for soft materials
-
Special drills
-
With soldering TK slice
-
Carbide drills
-
Drill sets
-
Drills for bent taps
-
Drill files
-
Countersinks - bits for drills
-
Set of universal drills 1.0-10.0mm HSS with stepped lead, ProfiLine Tornado, ZPS
* New item *Set of 19 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-10.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064019
In stock95,83 € with VAT -
Set of universal drills 1.0-13.0mm HSS with stepped lead, ProfiLine Tornado, ZPS
* New item *Set of 25 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-13.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064025
In stock194,81 € with VAT -
Collet chuck W16-ER11-150L with cylindrical shank
ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.
In stock41,54 € with VAT -
Metal drill set 1.0-10 mm x 0.5 mm 19pcs HSSCo5 TiN with cylindrical shank, FANAR
Recommended ✓Set of 19 pcs of ground cobalt twist drills for metal with reinforced core 1.0-10.0 mm Set contains drills of 0.5 mm Vertex angle: 112° Angle helix: approx. 36° Material: HSS Co5, resp. HSSE Order no. : Z2-019315-0000
In stock77,36 € with VAT