Metal drills, cylinder. stalk
-
Steel drills (HSS)
-
HSSCo5 drills
-
HSSCo8 drills
-
Drills for soft materials
-
Special drills
-
With soldering TK slice
-
Carbide drills
-
Drill sets
-
Drills for bent taps
-
Drill files
-
Countersinks - bits for drills
-
Carbide drill 5xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 39,36 € with VAT -
Carbide micro drill 5xD TiAlN 130 °, MICRON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 130 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: production standard Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 9,16 € with VAT -
SK drill bit 5xD AlTiN 140° DIN6537 K, internal cooling , ZPS - resale
Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S10122
from 46,57 € with VAT -
Carbide drill 5xD ZrN 140° type W DIN6535HA, I.C. , ZPS
Carbide drill SK / TK / HA / PVD for aluminum, non-ferrous metals and plastics Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 5D Other dimensions - see the attached catalog sheet Diameters that you only found in the catalog sheet are made to order. Tip angle: 140° Coating: ZrN - Coating with high corrosion resistance and high resistance to adhesion of non-ferrous metals. Machining Al alloys with a lower Si content, or machining of plastics and copper. Standard: DIN6535 HA (smooth shank) Usage : Aluminum, Al-alloys, copper, brass, bronze, plastics and other non-ferrous metals Aluminium, Al-Si alloys (Si < 6%) up to 400 MPa Al-Si alloys (Si < 12%) up to 600 MPa Aluminum alloys ( Si > 12% ) up to 600 MPa Copper, copper alloys, brass and bronze up to 800 MPa Plastics up to 300 MPa Cat. No. - series: S10132 ZrN
from 62,42 € with VAT -
SK drill bit 5xD AlTiN 140° DIN6537 K, internal cooling , ZPS
Carbide drill SK / TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Catalog number: S10222
from 51,01 € with VAT -
Carbide drill 8xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 8D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 76,34 € with VAT -
Universal HSS DIN338 drill bit with stepped lead , ProfiLine Tornado , PTG
* New item *Multi-purpose right-cut ground twist drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths The graduated tip is from a diameter of 2.5 mm From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages : Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping
from 1,74 € with VAT -
Carbide NC 90 ° drill for metal K20 / K30 PVD, CERANIT
Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 90 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation
from 8,86 € with VAT -
Carbide NC 120 ° drill for metal K20 / K30 PVD, CERANIT
Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 120 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation
from 8,86 € with VAT -
Extended carbide NC drill for metal K20/K30
Right-cut ground carbide extended NC drill with cylindrical shank Drilling diameter: according to the selected variant Total length: 120mm Blade angle: according to the selected variant Helix angle: 30° Material: Carbide - carbide / carbide K20 / K30, DIN6535 No coating Usage : Special drill for positionally accurate and fast drilling on NC / CNC machines, coordinate boring machines, etc. For centering and chamfering the edge of a thread hole in one operation If you need a different diameter, length or angle, ask us, we will be happy to offer.
from 38,93 € with VAT -
Carbide drill 12xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 12D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 110,76 € with VAT -
NC drill for metal 90 ° HSSCo5 ČSN 221185, StimZet
Right-handed ground short spiral NC drill for steel with cylindrical shank Edge angle: 90 ° Helix angle: 25-30 ° Material: HSSCo5 (High speed steel HSSE, ie HSS + 5% Co) Standard: ČSN 221185 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. The drill is used on NC machines for drilling holes in materials such as steel, stainless steel, composites, inconel, brass, titanium, aluminum alloys, plastics or wood. It can also be used for chamfering and deburring.
from 5,36 € with VAT