Mandrels for drill bits

Product count: 11
  • Drill chuck mandrel with tang CSN 241329 / DIN238

    Drill chuck mandrel with tang CSN 241329 / DIN238

    Taper drill mandrel for drill chuck (mandrel to chuck), type with carrier Spindle taper (morse): according to the selected variant Cone for the header: according to the selected variant Standard: ČSN 241329 / CSN 24 1329

    from 4,16 € with VAT
  • Drill chuck arbour with tang and thread ČSN 241329

    Drill chuck arbour with tang and thread ČSN 241329

    Taper thread drill mandrel for drill chuck (mandrel to chuck), type with carrier Spindle taper (morse): according to the selected variant Thread for the header: according to the selected variant Standard: replacement ČSN 241329 / CSN 24 1329 Use: for clamping a drill chuck, it can also be used to clamp something else.

    from 6,50 € with VAT
  • Milling arbor for drill chuck with taper

    Milling arbor for drill chuck with taper

    Taper milling mandrel for drill chuck (mandrel to chuck), female thread type Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Cone for the header: according to the selected variant Clamping of the drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper.

    from 6,07 € with VAT
  • Milling arbor for drill chuck with thread

    Milling arbor for drill chuck with thread

    Taper milling mandrel for drill chuck (mandrel to chuck), type with internal thread in Morse taper and external thread for chuck clamping Spindle taper (morse): according to the selected variant Internal thread: the size of the thread is given by the size of the morse taper, ie: MK1 = thread M8 MK2 = thread M10 MK3 = thread M12 MK4 = thread M16 Thread for the header: according to the selected variant Clamping of a drill chuck directly into the milling spindle, ie for milling machines with a Morse spindle taper. Use: for clamping a drill chuck, it can also be used to clamp something else.

    from 7,96 € with VAT
  • Mandrel for drill chuck ISO taper DIN2080

    Mandrel for drill chuck ISO taper DIN2080

    Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine - with manual tool change

    from 25,93 € with VAT
  • Mandrel for drill chuck ISO taper DIN69871

    Mandrel for drill chuck ISO taper DIN69871

    Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change

    from 28,33 € with VAT
  • Mandrel for drill chuck ISO taper JIS 6339 BT

    Mandrel for drill chuck ISO taper JIS 6339 BT

    Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: MAS BT / JIS 6339 B - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change This mandrel can also be used in machines with manual tool change.

    from 27,70 € with VAT
  • Mandrel for drill chuck with cylindrical shank

    Mandrel for drill chuck with cylindrical shank

    Mandrel for drill chuck (mandrel to chuck) with cylindrical shank Cylindrical shank diameter: according to the selected variant Cone for the header: according to the selected variant Length of the cylindrical part - see the description of the individual variant

    from 4,84 € with VAT
  • Mandrel for drill chuck B16 / R8, VJ-124-B16

    Mandrel for drill chuck B16 / R8, VJ-124-B16

    Drill chuck for cone chuck B16 Diameter of chuck part is 24mm. Taper Cone: R8 Internal Thread: 7/16 "-20 UNF Overall Length: 134mm Cone Length B16: 24mm Cylinder Stopper with 73mm Groove < br> Suitable for American BridgePort machines

    In stock
    15,81 € with VAT
  • Milling arbor SK 50 / B18 for drill chuck, MCT

    Milling arbor SK 50 / B18 for drill chuck, MCT

    Clamp reduction - ISO50 x B 18 insert ISO 50, M24 thread DIN 2080

    On request
    Price - On request
  • Mandrel with 1/2 "UNF thread and SDS shank

    Mandrel with 1/2 "UNF thread and SDS shank

    Adapter for clamping chuck in hammer drill or hammer hammer with SDS clamp Pin Thread: 1/2 "x20 UNF Clamping Procedure: Remove the screw from the mandrel with the cross head -

    In stock
    1,46 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Mandrels for drill bits