Machine (fast cutting)
-
Set of taps M3-M12 for AKU HSSE ISO2 B drill with breaker, VOLKEL
Set of machine taps with straight groove and chip breaker, for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: B Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes
In stock85,83 € with VAT -
Set of taps M3-M12 for AKU drill HSSE ISO2 C with spiral groove, VOLKEL
Set of machine spiral taps for metric thread - with hexagon for AKU drill Size: M3-M12 Pitch: basic Form: C Helix angle: 15° Material: HSSE - High Speed ??Steel 5% Cobalt Co5 Standard: DIN371(M12 DIN376) Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock97,48 € with VAT -
Machine tap M20 HSS-G ISO2 B ISO529 with chip breaker, VOLKEL
Right machine tap, straight slot with chip breaker, for metric thread Size: M20 x 2.5 / 20x2.5 Pitch: 2.5 Form: B Material: HSS - High-speed steel Standard: ISO529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For through holes
In stock30,89 € with VAT -
Machine tap M20 HSS-G ISO2 C ISO529 spiral, VOLKEL
Machine tap, spiral - helix, for metric thread Size: M20 / 20x2.5 Pitch: 2.5 Spiral: 35° Form: C Material: HSS - High-speed steel Standard: ISO 529 Usage: Well machinable materials up to 800 N/mm2 Non-alloyed and low-alloyed steels For blind holes
In stock37,76 € with VAT -
Machine tap UNS 1/2 - 24 HSS LH left, CZTOOL
Machine Tap, Straight Slot on US Unified inch Thread Size: UNS 1/2 "x 24 LH Angle: 24 Paths per inch Form: B Material: HSS - Rapid Cut Steel Usage: Well-machined materials up to 600 N / mm2 Unalloyed and low alloy steels For through holes
On request114,28 € with VAT -
Machine tap short M7 HSS ISO2 B(6H) ISO529-D, FANAR
Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: B, 3-4 feeds - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2
On request5,88 € with VAT -
Machine tap W 21.8 x 14 HSS, CZTOOL
Machine tap with straight groove whitworth BSW 21.8 x 1/14, custom production Pitch: 14 feet per inch, basic(W21,8x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves
On request134,79 € with VAT -
Machine tap W 24.32 x 14 HSS, CZTOOL
Machine tap with straight groove whitworth BSW 24,32 x 1/14, custom production Pitch: 14 feet per inch, basic(W24,32x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves
On request157,26 € with VAT -
Machine tap BSC 1/2 x 26 HSS, CZTOOL
Machine tap, straight groove, BSCy cyclo thread Size: 1/2" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request184,61 € with VAT -
Machine tap BSC 5/8 x 26 HSS, CZTOOL
Machine tap, straight groove, BSCy cyclo thread Size: 5/8" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request202,19 € with VAT -
Machine tap BSC 9/16 x 26 HSS, CZTOOL
Machine tap, straight groove, BSCy cyclo thread Size: 9/16" Pitch: 26 steps per inch Form: C Top angle of thread: 60° Material: HSS - High Speed ??Steel 5% Cobalt Co5 Use: Well machinable materials up to 900 N/mm2 Non-alloyed and low-alloyed steels For through holes
On request193,41 € with VAT