Machine (fast cutting)

Product count: 180
  • Machine tap M - HSSE ISO2(6H) with chip breaker, FANAR

    Machine tap M - HSSE ISO2(6H) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

    from 8,71 € with VAT
  • Machine tap M - HSSE TiN ISO2(6H) with chip breaker 800X, FANAR

    Machine tap M - HSSE TiN ISO2(6H) with chip breaker 800X, FANAR

    Machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals

    from 10,32 € with VAT
  • Machine tap M - HSSE TiN ISO3 (6G) with chip breaker 800X , FANAR

    Machine tap M - HSSE TiN ISO3 (6G) with chip breaker 800X , FANAR

    Machine tap with straight groove and chip breaker 800X Fitting: ISO3 (6G) - plus tolerance for threads, where surface treatment (galvanization, etc.) will be applied Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

    Price - On request
  • Machine tap M - HSSE-PM TiAlSiN ISO2(6H) with chip breaker, FANAR

    Machine tap M - HSSE-PM TiAlSiN ISO2(6H) with chip breaker, FANAR
    Recommended ✓

    Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

    from 12,62 € with VAT
  • Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 17,38 € with VAT
  • Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR

    Machine tap with straight groove and chip breaker, made of sintered steel, type PM TS Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 13,41 € with VAT
  • Machine tap M - HSSE ISO2 C(6H), FANAR

    Machine tap M - HSSE ISO2 C(6H), FANAR

    Machine tap (high speed) M, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

    from 7,33 € with VAT
  • Machine tap G - HSSE GG TiCN DIN5156C , Fanar

    Machine tap G - HSSE GG TiCN DIN5156C , Fanar
    Recommended ✓

    Machine tap with straight groove, type GG Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 5156 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2

    from 40,79 € with VAT
  • Machine tap M - HSSE GG TiCN ISO2 (6HX), FANAR

    Machine tap M - HSSE GG TiCN ISO2 (6HX), FANAR
    Recommended ✓

    Machine tap with straight groove, type GG Fitting: ISO2 (6HX) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 371, DIN374, DIN376 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2

    from 9,45 € with VAT
  • Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX), FANAR

    Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX), FANAR

    Machine tap with straight groove, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 11,87 € with VAT
  • Machine tap M - HSSE-PM 1400-HT TiAlSiN ISO2 (6HX), FANAR

    Machine tap M - HSSE-PM 1400-HT TiAlSiN ISO2 (6HX), FANAR
    Recommended ✓

    Machine tap with straight groove, made of sintered steel, type PM TS 1400 HT TC Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

    from 12,31 € with VAT
  • Machine tap M - left HSSE TiN ISO2 with chip breaker 800X, FANAR

    Machine tap M - left HSSE TiN ISO2 with chip breaker 800X, FANAR

    Left hand machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

    from 12,89 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Machine (fast cutting)