Lathe accessories

Set of 9 gears for lathe MN-80 for cutting metric threads Made by rolling, material 12 050(C45) Number of teeth — in module 1: 25, 25, 30, 35, 40, 45, 50, 60, 70 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm For these gears for the composition of the exchange double transmission, you also need Bronze wheel clutch B and C(see related products). In addition, a basic gear wheel 30/20 of(, see related products), which provides a primary gear set in a gear unit worth 20z. To cut a thread where wheel A contains a value other than 20 teeth, you need a gear thread with 30 teeth(see related products) as a tray for wheel A.

MN 80 - The toothed gear is very precisely chopped and the chosen production technology ensures the zero rolling of the wheel rims to each other. Everything cut.

Gear diameter: 21.8mm Shaft diameter: 15mm Length: 90mm

Flange Clamp Flange ER32 for Lathe MN 80 Flange Diameter: 80mm Material: Steel Thread: M 39 × 4

Enhanced Nonius Longitudinal MN 80 Lathe Diameter: 40mm Number of Pieces: 150 Splitting: 0 - 0,1 - 0,2 ... etc ... 1, 3 - 1,4 - 0 Opening: 10H7 As with the original nonius: 30 pieces for the pitch of the 1.5mm feed screw, 0.05mm This Improved Nonius: More accurate division, 0.01mm per Piece with a total of 150 Pieces All dimensions are the same as for the original Nonius , diameter 40mm, hole 10 H7, shoulder, recesses, etc. except for a length that is about 3mm larger. As always, the scale is very precisely rolled away. This nonius also fits into the original milling support for MN 80 MN 821 lathe.

Improved Transverse Nonius Lathe for MN 80 Lathe with Logic Reading on Scale Diameter: 40mm Number of Pieces: 150 Splitting: 0 - 0.5 - 1.0 - 1.5 - 2.0 - 2.5 - 0 Length: 17mm Opening: 10H7 Radius Diameter: 43mm As with the original nonius: < Bad Logic Countdown, 0.1mm Cutting. 30pcs on pitch 1.5mm, ie. when moving one piece with a value of 0.05, the 0.1mm offset with an illogical reading on a scale equal to the pitch of the bolt in the case of a lateral displacement. The longitudinal movement of the blade holder is then correct. This improved nonius: 150 pieces with a logical reading on a scale indicating the material pick on the diameter and one piece with a value of 0.01mm have a 0.02mm clearance on the total diameter workpiece! For replacement, just remove the loop, swing the spring plate. Moreover, the nonius is about 5mm longer so it is clearer. This nonius can also be used for various preparations or anything else related to reading.

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 80mm Flange diameter: 80mm Material: Steel Thread: M 39 × 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 80mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 100mm Diameter flange: 100mm Material: Steel Thread: M 39 × 4

Flange for universal chuck KUS for lathe MN 80 Designed for universal chucks series KUS 100mm from our offer For chucks: IUS 100mm Flange diameter: 100mm Material: Steel Thread: M 39A — 4

Semi-finished flange for clamping universal chuck, for lathe MN 80 Diameter of flange: 100mm Flange is without machined mounting and without holes for chuck clamping. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Flange for universal chuck ITEM for lathe MN 80 Designed for universal chucks of the ITEM series 125mm from our offer Diameter Screws: 125mm Material: Steel Thread: M 39A — 4