ISO mandrels for milling cutters

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Other dimensions - see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

Milling mandrel for clamping a milling head / milling cutter with an external thread Clamping cone: according to the selected variant Thread size for the cutter: according to the selected variant Length from the collar to the clamping part of the cutter: according to the selected variant Other dimensions: see attached photo Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling arbor for clamping cylindrical cutters Shank ISO 50 Internal thread in taper ISO 50 is M24 Diameter 40mm Hole lka chucks for milling cutters 60mm M20 screws with cross head < br> A „A’SN 247220 / can also be used for DIN2080 Goods from oversupply, not used  ©

Milling arbor for clamping cylindrical cutters Shank ISO 50 Internal thread in taper ISO 50 is M24 Diameter 60mm Hole lka clamping parts for milling cutters 60mm M30 screws with cross head A „A’SN 247220 / can also be used for DIN2080 Goods from oversupply, unused  ©

Long milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: SK ISO 30 Inner thread: M12 Diameter: 16mm Clamping part length: 250mm Total length: 366mm Nut A^14SN 241437: M14x1 , 5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241431 / CSN 24 1431 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Milling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.

Milling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.

Milling Cutter for Clamping Socket Roller Cutters Milling Cutter Type: Stones and 4x Bolt Clamping Taper: SK ISO 40 Internal Thread: M16 Diameter: 40mm Clamping Length: 38mm Screw: M20 with cross head Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Uses: These clamps are used for clamping pre-cut tools.

Milling Cutter for Socket Cylindrical Milling Cutters Milling Cutter Type: Stones and 4x M12 Screw Clamping Taper: SK ISO 50 Internal Thread: M24 Diameter: 40mm Length of Clamping Part : 38mm Screw: Cross-head M20 Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Use: These spindles are used for clamping pre-cut tools.

Taper shank: ISO 40 Overall length: 130mm Cylinder bore diameter: 40mm Inner thread in your Clamping parts: M12 Cylindrical length: 38mm These mandrels are used to clamp milling heads with cylindrical drilling. Unused, oversupply.

Taper shank: ISO 50 Overall length: 170mm Cylinder bore diameter: 60mm Inner thread in your Clamping parts: M12 Cylindrical length: 45mm These mandrels are used to clamp milling heads with cylindrical drilling. Unused, oversupply.

Unused milling mandrel combined for clamping insert milling cutters Milling method for milling cutter: stones or pen Clamping cone: SK ISO 40 Insert vit for spindle screw: M16 Cylindrical diameter for end mill: 32mm Cylindrical length Cutter parts: 36mm Distance from collar to end of clamping part: 72mm Thread screw for clamping cutter © zy: M16 Standard: ÄOSN / PN 247224(type 591005 - 03), usable also for machines with DIN2080 Overstock, non-original packaging, missing clamping pen.