HSS
-
Step drill for metal 4-32mm HSS with spiral groove and chip breaker TiAlN
Stepped Drill with 4-32mm Spiral Groove 4-6-8-10-12-14-16-18-20-22-24-26-28-30-32mm < Clamping Diameter: 10mm Material: HSS Coating: TiAlN Suitable for drilling into structural steel, CrNi steel and non-ferrous metals up to 5mm. PROGRIP system prevents slipping of the stem in the chuck and optimally transmits torque Spiral groove guarantees quiet operation and high drilling performance Edges in a single step The coating increases the service life of the drill bit but must not overheat! Procedure: High speed for drilling small diameters, when drilling larger diameters, the need for speed is gradually reduced due to increasing circumferential speed. When the coating overheats, the blade is knocked and the blade has to be sanded.
In stock12,67 € with VAT -
Step drill for metal 6-38mm HSS with helical groove and TiAlN chip breaker
Stepped Spiral Groove Drill 6-38 mm Diameter: 6-9-13-16-19-21-23-26-29-32-35-38mm Material: HSS < br> Coating: TiAlN Suitable for drilling into structural steel, CrNi steel and non-ferrous metals up to 5mm. PROGRIP system prevents slipping of the stem in the chuck and optimally transmits torque Spiral groove guarantees quiet operation and high drilling performance Edges in a single step The coating increases the service life of the drill bit but must not overheat! Procedure: High speed for drilling small diameters, when drilling larger diameters, the need for speed is gradually reduced due to increasing circumferential speed. When the coating overheats, the blade is knocked and the blade has to be sanded.
In stock18,56 € with VAT -
Step drill for metal 10-45mm HSS with spiral groove and chip breaker TiAlN
Diameter: 10 15 20 25 30 35 40 and 45 mm Clamping Diameter: 12mm Material: HSS Coating: TiAlN Suitable for drilling into structural steel, CrNi steel and non-ferrous metals up to 5mm. PROGRIP system prevents slipping of the stem in the chuck and optimally transmits torque Spiral groove guarantees quiet operation and high drilling performance Edges in a single step The coating increases the service life of the drill bit but must not overheat! Procedure: High speed for drilling small diameters, when drilling larger diameters, the need for speed is gradually reduced due to increasing circumferential speed. When the coating overheats, the blade is knocked and the blade has to be sanded.
In stock22,32 € with VAT -
Step drill for metal 4-12mm HSS TiN with helical groove
Drill stepped in metal, steel plate, acrylic glass and not. metal up to 4mm Range: 4-12mm (Step 2mm) Material HSS - High-speed steel TiN coating Shank diameter: 6mm 8mm clamping with three flats for better fit. Stepped spiral drills
In stock5,03 € with VAT
