Heart

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 60 ° Helix angle: 0 ° Forehead angle: 0 ° Other dimensions - see product description for individual variants Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Other dimensions - see product description for individual variants Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Working part diameter: according to the selected variant, tolerance h6 Top angle: 120 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Diameter of the working part: according to the selected variant Top angle: 60 ° Helix angle: 0 ° Forehead angle: 0 ° Number of edges: dia.4-6mm - 4-edges dia.8mm - 5-edges dia.10-12mm - 6-edges Other dimensions: see product description for individual variants Standard: DIN 6535 HA Coating: PVD (TiAlN) Usage: Steel up to 55 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Diameter of the working part: according to the selected variant Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Number of edges: dia.4-6mm - 4-edges dia.8mm - 5-edges dia.10-12mm - 6-edges Other dimensions: see product description for individual variants Standard: DIN 6535 HA Coating: PVD (TiAlN) Usage: Steel up to 55 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo