For lathe

Tool for cutting taps / machine beam for threaded round jaws both for taps(up to M12) and for taps(see related products) Clamping shank: taper MK3 Designed for cutting external threads This is a practical and ready-made tool for cutting The thread on the lathe. The tool consists of a cylindrical mandrel with an MK3 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm As part of this set we also supply a glass for M3 -8 and M5-12 taps The set also includes a retainer Reaction catch rod Dimensions: Total length including clamping shank: 155-170mm(according to the inserted case) Clamping shank: conical, MK3(morse 3) Maximum extension / step: 50mm Replacement tapers for taps can be purchased separately - see.related products.

Tool for cutting threads on a small lathe Clamping shank 10mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 10mm, shank length 34mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)

Tool for cutting threads on a small lathe Clamping shank 12mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 12mm, shank length 24mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)

Tap chuck with hexagonal shank with groove for locking in bit holder Range: M3-M8 Clamping shank: classic hexagon 6.3mm Thanks to the groove it is possible to use the chuck on the shank and in the bit adapter with locking.

Tap chuck for battery drill etc. Range: M3-M8 Clamping shank: dia. 6.7mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

Hex Shank Tap Chuck with Groove for Locking in Bit Holder Range: M5-M12 Clamping shank: classic hexagon 6.3mm Thanks to the groove on the shank, the chuck can also be used in the bit adapter with locking.

Tap chuck for cordless drill etc. Range: M5-M12 Clamping shank: dia. 8.8 mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.