For drill / milling machine
-
Thread cutter M8-M20, ISO 40 with length compensation for TC-820 with torque coupling, VQT
norms: DIN69871 Adapters in set of taps: DIN 371 (reinforced stopper): M8; M10; DIN 376 (classical shank): M12; M14; M16; M18; M20 Length compensation - see photo no.3, no.4 and no.12 The set is delivered in the trunk - see photo 9 and no.10 Taper clamping method: The taps are secured in the extension behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Extensions are secured in the head via a bearing and stones - see photo no.5 and no.6 Extension of the extension see photo no.7 and no.8 You can buy the set Taps for M5 - M24 taps - see photo n ° 11 Taps for taps manufactured in accordance with JIS and ISO 529, which are not common in our country, can also be purchased for the die head. Approximately 90% of the domestic market consists of taps made according to DIN standards Taps are not a part of the set!
In stock619,05 € with VAT -
ISO50 BT thread cutter for TC-1433 collets with length compensation, BT50-WF33
Quick-release threading head with length compensation for TC 1433 attachments with torque coupling for machine taps Clamp range: M14 - M33 Clamp shank: steep taper BT ISO50 Length from spindle: Standard: JIS 6339 MAS ??BT 50 Length compensation - see photo (other photos are for type DIN69871) Method of clamping the tap: The taps are in the extension secured by a square and a clamping shank. The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension. The extensions are secured in the head via the bearing and stones - see photo (photo is for type DIN69871) Ejection of the extension - see photo (other photos are for type DIN69871) < u>Extensions and taps are not part of the set! Functions: The tap is clamped in a suitable collet TC1433, which has a torque coupling already preset. or it is possible to fine-tune it as needed. The thread cutter has a length compensation of approx. 0.5 cm, so it is enough to program the appropriate cutting depth. The torque coupling prevents the tap from twisting.
In stock286,59 € with VAT -
Thread cutter ISO50 DIN69871 for collets TC-1433 with length compensation, SK50-WF33
Quick-action tapping head with length compensation for TC 1433 attachments with torque coupling for machine taps Clamping range: M14 - M33 Clamping shank: steep taper DIN ISO50 Length from spindle: Standard: DIN69871 50 Length compensation - see photo Method of clamping the tap: The taps are secured in the extension by a square and a clamping shank. The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension. The attachments are secured in the head via the bearing and stones - see photo Extension of the attachment - see photo The attachments and taps are not part of the set! Function: The tap is clamped in a suitable collet TC1433, which has a torque coupling already preset, or it can be fine-tuned as needed. The thread cutter has a length compensation of approx. 0.5 cm, so it is enough to program the appropriate cutting depth. The torque coupling prevents the tap from twisting.
In stock286,59 € with VAT -
HSK A63 thread cutter for TC-312 collets with length compensation, HSK63A-WF12
Quick-action tapping head with length compensation for TC 312 attachments with torque coupling for machine taps Clamping range: M1 - M14 Clamping shank: HSK 63A Length from spindle: 65mm Standard: DIN 69893 - HSK-A63 Length compensation - see photo Method of clamping the tap: The taps are secured in the extension by a square and a clamping shank. The tap is firmly held in the extension, pulled out after pressing the clamping collar in the front of the extension. The attachments are secured in the head via the bearing and stones The attachments and taps are not part of the set! Functions: The tap is clamped in a suitable collet TC312, which has a torque coupling already preset, or it can be fine-tuned as needed. The thread cutter has a length compensation of approx. 0.5 cm, so it is enough to program the appropriate cutting depth. The torque coupling prevents the tap from twisting.
In stock166,10 € with VAT -
HSK A63 thread cutter for TC-820 collets with length compensation, HSK63A-WF20
Quick-action threading head with length compensation for TC 820 attachments with torque coupling for machine taps Clamping range: M6 - M24 Clamping shank: HSK 63A Length from spindle: 105mm Standard: DIN 69893 - HSK-A63 Length compensation - see photo Method of clamping the tap: The taps are secured in the extension by the square and the clamping shank. The tap is firmly held in the extension, pulled out after pressing the clamping collar in the front of the extension. The attachments are secured in the head via the bearing and stones The attachments and taps are not part of the set! Functions: The tap is clamped in a suitable collet TC820, which has a torque coupling already preset, or it can be fine-tuned as needed. The thread cutter has a length compensation of approx. 0.5 cm, so it is enough to program the appropriate cutting depth. The torque coupling prevents the tap from twisting.
In stock170,95 € with VAT -
Reverse tapping head M2-M8 - JT33 with torque coupling, VTA8-J33
Reverse die head suitable for M2-M8 dimensions Thread cutting including 2 pcs of RUBBER FLEX collet FC-10 and FC-11. Longitudinal Compensation: Max. 10mm Extension Clamping Cone: JT33, MK2 and MK3 clamping clamps are included. Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Dimensions: Diameter: 53mm Thread cutting height: 90mm Overall height: 128mm
In stock251,57 € with VAT -
Reversible tapping head M5-M12 - M16 with torque coupling, VTA12-M16
Reversible tapping head suitable for M5-M12 dimensions Thread cutting including 2 pcs of RUBBER FLEX collet FC-20 and FC-21. Longitudinal Compensation: Max. 14mm Extrusion Clamping Thread: M16, MK3 and MK4 clamping spindles are included. Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Dimensions: Diameter: 74mm Thread cutting body height: 115mm Overall height: 165mm
In stock359,06 € with VAT -
Reversible tapping head M8-M18 - M20 with torque coupling, VTA20-M18
Reverse die head suitable for M8-M18 dimensions Screwdriver including 2 pcs of RUBBER FLEX collet FC-30 and FC-31. Longitudinal Compensation: max. 17mm Extension Clamping Thread: M20, MK3 and MK4 clamping clamps are included. Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Dimensions: Diameter: 90mm Thread cutting body height: 135mm Overall height: 200mm
In stock402,31 € with VAT