Fixed
-
Dead center 60° DIN806 / CSN 243310
Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN806 / DIN 806 / replacement ČSN 243310 / CSN 243310
9,62 € with VAT -
Dead center 60° CSN 243310 , Skoda
Clearance saleLathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243310 / CSN 243310 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.
from 11,79 € with VAT -
Dead live center 60 ° with carbide tip DIN806 / CSN 243311
Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants Standard: DIN806 / DIN806 / replacement ČSN 243311 / ČSN 24 3311
from 11,06 € with VAT -
Dead live center 60 ° with carbide tip DIN806 / CSN 243311 , Narex
Clearance saleFixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243311 / ČSN 24 3311 / DIN806 / DIN 806 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.
from 13,47 € with VAT -
Dead live center 60 ° with carbide tip DIN806 / CSN 243311 , Karned
Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243311 / ČSN 24 3311 / DIN806 / DIN 806
from 47,60 € with VAT -
Flattened dead center 60° DIN807 / CSN 243317 - tool steel
Clamping tip fixed flattened with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Material: Tool steel Standard: DIN807 -> replacement for ČSN 243317 - without sintered carbide insert!
from 6,10 € with VAT -
Extended flattened carbide-tipped dead center 60 ° DIN807 / CSN 243317
Extended clamping tip fixed flattened MK 3 with apex angle 60 ° and sintered carbide insert - for grinders Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN807 -> replacement for ČSN 243317
from 43,51 € with VAT -
Carbide-tipped flattened dead center 60 ° DIN807 / CSN 243317
Clamping tip fixed flattened with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN807 -> replacement for ČSN 243317
from 15,86 € with VAT -
Carbide-tipped flattened dead center 60 ° DIN807 / CSN 243317 , Narex
Clearance saleSpannspitze fest abgeflacht mit 60° Spitzenwinkel und gesinterter Hartmetalleinlage Morsekegelgröße: je nach gewählter Variante Andere Abmessungen - siehe Etiketten für einzelne Varianten Die gesamte Spitze ist auf eine Härte von HRC 58 bis 62 gehärtet. Norm: ČSN 243317 / ČSN 24 3317 / DIN807 / DIN 807 Feste Spitzen sind tschechische Produktion, unbenutzt, stammen aus Überbeständen. Nur eine begrenzte Auswahl.
from 11,74 € with VAT -
Carbide-tipped flattened dead center 60 ° DIN807 / CSN 243317 , Karned
Clamping tip fixed flattened with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243317 / ČSN 24 3317 / DIN807 / DIN 807
from 63,46 € with VAT -
Fixed driving tip MK4, type VDK, VERTEX
Morse clamping tip - for wood, plastic, etc. Diameter of the driving part: according to the selected variant Other dimensions - see descriptions of individual variants To clamp the workpiece between the centers, it is clamped to the lathe spindle directly or via a reduction sleeve. A rotating tip is suitable for the tailstock quill. Before clamping the workpiece, it is necessary to first drill centering holes in the workpiece. Body and tip are made of SLD steel, HRC 62 °
from 139,09 € with VAT
