English inch threads

Product count: 14
  • Round thread die W - CS, CZTOOL

    Round thread die W - CS, CZTOOL

    Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle: 55° Material: CS - Carbon tool Steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

    from 3,84 € with VAT
  • Round thread die W - CS , sale

    Round thread die W - CS , sale
    Clearance sale

    Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Climb: in numbers of strokes per inch; BSW - basic climb (rough) Top angle: 55 ° Material: CS - Carbon tool Steel Standard: DIN223, DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges From excess stock (brands ZONA, SIGMA, ŠKODA, etc.) from the company's dispensary Unused or only slightly used.

    from 3,55 € with VAT
  • Round thread die W - HSS, CZTOOL

    Round thread die W - HSS, CZTOOL

    Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle: 55° Material: HSS - High Speed Steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

    from 9,44 € with VAT
  • Round thread die W - HSS, VOLKEL

    Round thread die W - HSS, VOLKEL

    Thread eye with jaws / threaded eye with jaws Thread type: W, or BSW (British Standard Whitworth) Rise: in steps per inch (basic) Apex angle: 55° Other dimensions - see the attached catalog sheet Standard: DIN 223, BS 84 Also corresponds to the standard: DIN EN 22568 Material: HSS - High-speed steel

    from 12,57 € with VAT
  • Round thread die W - HSS DIN223 , sale

    Round thread die W - HSS DIN223 , sale

    Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle: 55° Material: HSS - High Speed Steel Standard: DIN 223 / DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

    from 3,01 € with VAT
  • Round thread die W - HSS with chip breaker , CZTOOL

    Round thread die W - HSS with chip breaker , CZTOOL

    Circular thread dies with chip breaker Thread type: Whitworth - BSW (British Standart Whitworth) Climb: in numbers of strokes per inch; BSW - basic climb (rough) Top angle: 55 ° Material: HSS - High speed steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

    from 8,36 € with VAT
  • Hexagonal threaded jaw W - HSS , CZTOOL

    Hexagonal threaded jaw W - HSS , CZTOOL

    Hexagon thread die / thread die with hexagon jaws Thread type: Whitworth - BSW (British Standart Whitworth) Climb: in numbers of strokes per inch; BSW - basic climb (rough) Top angle: 55 ° Material: HSS - High speed steel Standard: DIN382, BS 84: 1956 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

    from 11,00 € with VAT
  • Round thread die BSF - HSS, CZTOOL

    Round thread die BSF - HSS, CZTOOL

    Circular thread dies Thread type: Whitworth - BSF (British Standard Whitworth - Fine) Pitch : in numbers of strokes per inch Top angle: 55 ° Material: HSS - High speed steel Standard: DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges

    from 12,33 € with VAT
  • Round thread die BSF - HSS, VOLKEL

    Round thread die BSF - HSS, VOLKEL

    Threaded eye with jaws / threaded eye with jaws Thread type: BSF (British Standard Whitworth - Fine), fine British whitworth thread Standard: DIN 223 Also complies with standard: DIN EN 22568 Material: HSS - High speed steel

    from 12,57 € with VAT
  • Left-sided round thread die W - HSS, VOLKEL

    Left-sided round thread die W - HSS, VOLKEL

    Left threaded die Thread type: Whitworth - BSW (British Standart Whitworth) left Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle : 55 ° Material : HSS - High speed steel Standard : BS84 / DIN223 / DIN EN22568, replacement PN 8/3211 * Average conversion : 1 "= 25.4mm * Conversion of pitch to millimeters : we do not recommend, it pays to buy thread gauges

    from 19,42 € with VAT
  • Round thread die BA adjustable BS1127, VOLKEL

    Round thread die BA adjustable BS1127, VOLKEL

    Threaded eye with jaws / threaded eye with jaws Thread type: BA - British Association - model thread Thread apex angle: 47.5 °, rounded top and bottom of the thread Standard: BS1127, BS93 Material: HSS - High speed steel

    13,84 € with VAT
  • Round thread die UNC 7/16 HSS - DIN 223

    Round thread die UNC 7/16 HSS - DIN 223

    Threaded Eyelet, Threaded Round Jaw Threaded Eyeliner With Jaw / Threaded Eyeliner With Jaws Size: UNC 7/16 (equivalent to 11,112mm) Gradient: 14 Strokes per inch American Whitworth Thread - UNC (Unified Coarse) Mateal: HSS Outer diameter: 30mm

    In stock
    3,51 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

English inch threads