Drills
-
Metal drills, cylinder. stalk
-
Drills for metal, cone. stalk
-
Metal drills, 6hr shank
-
Core and core drills
-
VBD drills
-
VBD for drills
-
Step drills for metal
-
Centering drills - drills
-
Two-stage drills
-
Carbide drill for steel and stainless steel
Carbide core drill / puncher / drill bit is made of one piece - including shank. Diameter: according to the selected variant (average tolerance 1mm) Drilling depth: 25mm It has powered carbide teeth, which allow easier drilling with less pressure force. Precise guidance is ensured by a removable guide drill with a diameter of 6 mm. The spring on the drill bit is used for easy removal of the drilled material. The guide drill is secured with an Allen key. The drill has a ground surface. The teeth are 3 mm wide, which ensures more economical drilling. The clamping shank is adapted for clamping in a three-jaw chuck. Application: Column drill , or hand drill with drills up to a diameter of about 40-50 mm - but it is necessary to keep the drilling axis and always keep all the cutting edges in engagement. If you do not keep all the blades in engagement or you are not able to keep the drill in the drilling axis (jerks, shocks, etc.), the carbide blade may be chipped - ie irreversible damage to the tool.
from 4,60 € with VAT -
Extended drill for metal HSS PN2916, 340RNHSS
Extended right-handed ground twist drill for steel with cylindrical shank Drill length: Extended range - lengths see attached photo Drilling depth: 10xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: PN 2916, DIN 340 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
from 1,00 € with VAT -
Extended cobalt drill for metal HSSCo5 PN2916, 340RNHSSCo5
Extended right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Extended range - lengths see attached photo Drilling depth: 10xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSSE - High speed steel + Co5, HSSCo5 Standard: PN 2916, DIN 340 RN Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Titanium alloys, heat-resistant steels, austenitic steels resistant to corrosion (stainless steels) and acids
from 2,07 € with VAT -
Extended cobalt drill for metal HSSCo5 PN2915, 340RTiHSSCo5
Extended right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Extended range - lengths see attached photo Drilling depth: 10xD Edge angle: 130 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 36 ° Material: HSSE - High speed steel + Co5, HSSCo5 Standard: PN 2915, DIN 340 RN Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Titanium alloys, heat-resistant steels, austenitic steels resistant to corrosion (stainless steels) and acids
from 2,18 € with VAT -
Extra long HSS metal drill, ČSN 221130
Clearance saleExtra long right-hand twist drill for steel with cylindrical shank Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: ČSN 221130 Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
from 0,98 € with VAT -
Extra long HSS metal drill, DIN 1869, ZV 3001, StimZet
Extra long right-hand twist drill for steel with cylindrical shank Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS Standard: DIN1869, ZV 3001 Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
Price - On request -
Extra long metal drill HSSCo5, ZV 3001 T1000, StimZet
Extra long right-hand twist drill for steel with cylindrical shank Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSSCo5 - High speed steel + 5% Co5 Standard: DIN1869, ZV 3001, T1000, GT100 Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
from 6,75 € with VAT