Drills

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 5,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 6,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 8,0mm Max. Recess Diameter: 20mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 10,0mm Max. Recess Diameter: 20mm Suitable for countersinking, for recessed head screws - screws

Set of 19 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-10.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064019

Set of 25 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-13.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064025

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Practical Hinged Pivot Wrench for 10mm and 12mm Screws Material: Cr-V, Chrom-Vanadium

Drill stepped in metal, steel plate, acrylic glass and not. metal up to 4mm Range: 4-12mm (Step 2mm) Material HSS - High-speed steel TiN coating Shank diameter: 6mm 8mm clamping with three flats for better fit. Stepped spiral drills

Bracket, brace for clamping bi-metal crowns with diameters 14-30mm Drill bit diameter: 6,5mm Hexagon for clamping: 10mm For clamping crowns diameters 14-30mm

Bracket for bimetallic crown with diameters 32-152mm Drill bit diameter: 6,5mm Hexagon for clamping: 10mm For drilling of 32-152mm drilling crowns