Drills
-
Metal drills, cylinder. stalk
-
Drills for metal, cone. stalk
-
Metal drills, 6hr shank
-
Core and core drills
-
VBD drills
-
VBD for drills
-
Step drills for metal
-
Centering drills - drills
-
Two-stage drills
-
Set of drills for metal 1-10 mm x 0.1 mm HSS Co5 with cylindrical shank, RTi
Set of 91pcs chopped cobalt spiral drills in metal with reinforced core 1,0-10,0 mm Top angle: 130 ° special cut to DIN 1412, shape C (for chip machining of stainless steels and special materials) Hex angle: 36 ° Material: HSS Co5 (5% Co5) DIN338 RTi (replaces PN 2907 / PN2907) Cobalt tungsten-molybdenum steel with very good cutting properties, hardness and toughness, suitable for heavily machinable materials. Plastic binder with cover. Usage: General - Hand-held, Pillar, Pole Drills Alloy Steel, Cast Steel With Strength> 1000 N / mm2 Stainless Steel Hot and Cold Forming, Rolling Mill Rolls, Steel for Cementing and Finishing Drills have increased heat resistance with a special groove profile. 338RTiHSSCo91PP
In stock319,73 € with VAT -
Set of 4-10mm drills with soldered SK blade TP320
Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 4/5/6/8 / 10mm pr . 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320
On request66,27 € with VAT -
Set of drills 3-10mm with soldered SK blade TP320
Set of 5 drills with cylindrical shank and brazed carbide insert Diameters: 3/4/5/6/7/8 / 10mm pr. 3 x 19x51mm dia. 4 x 24x57mm dia. 5 x 36x72mm dia. 6 x 40x76mm dia. 7 x 47x87mm dia. 8 x 51x97mm dia. 10 x 59x107mm Usage: For drilling in hand or column drills - suitable for drilling in hard steels, cast iron and stainless steels . This design is not as prone to vibration as monolithic carbide drills, ie it is ideal if you need to drill screws, hard sheets in the hand drill, etc. - we recommend drill a small diameter and make sure that the drill does not overheat - the insert could become detached. standards Standard: PN 221320 / PN221320 / PN 1320
On request81,54 € with VAT -
Set of universal drills 1.0-10.0mm HSS with stepped lead, ProfiLine Tornado, ZPS
* New item *Set of 19 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-10.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064019
In stock94,26 € with VAT -
Set of universal drills 1.0-13.0mm HSS with stepped lead, ProfiLine Tornado, ZPS
* New item *Set of 25 pcs of multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 1.0-13.0mm x 0.5mm Drill length: Short range - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill a hole smaller diameter. Perfect for tapping Cat. no.: 283064025
In stock191,59 € with VAT