Drilling

Right-handed ground short spiral NC drill for steel with cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 120 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN 1897 / DIN1897 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Right-handed ground short spiral NC drill for steel with cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 120 ° Helix angle: 25-30 ° Material: HSSCo5 (High speed steel HSSE, ie HSS + 5% Co) Standard: DIN 1897 / DIN1897 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Crown drill / puncher / drill bit bi-metal, jigsaw Average: according to the selected variant Max. drilling depth: 38mm Catalog number: 20.1500 Cutting conditions - see attached catalog sheet Material: HSS Co8 (high speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals * From a diameter of 160 mm, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. HSS Co8 bimetal jigsaw. Fine gearing is very well suited for metals. It ensures a quieter operation and requires less effort. Due to less heat generation during cutting, the service life is extended, especially for metals. Suitable for alloy and common steels (up to 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Short drill with cylindrical shank, material HSS Standard: PN 2905 / DIN1897RNHSS Form C - ground conical surface with shortening of the transverse edge - type C PROFI - tools produced by grinding and precision milling Powerful drills recommended for common drilling on automatic and turret lathes in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steel, short-chip aluminum alloys, bronze, tough brass . Especially suitable for drilling thin-walled materials.

Short drill with cylindrical shank, material HSS Co5 Standard: PN 2905 T1000 / DIN 1897 GT100 Form C - ground conical surface with shortening of the transverse edge - type C PROFI - tools produced by grinding and precision milling High-performance drills with increased heat resistance with a special groove profile recommended for drilling in alloy steel parts, steel castings with strength above 1000 N / mm2, especially steels for volume hot and cold forming, rolls of rolling mills, steels for cementing and tempering, stainless steel.

Right-handed ground twist drill with slow helix, for hard brittle materials with brittle chips Drill length: Classic short series - lengths see enclosed catalog sheet Edge angle: 118 ° Helix angle: 10 ° - 15 ° Material: HSS - High speed steel Standard: PN2911, DIN338 RH Usage: General - hand, stand, column drills Non-ferrous metals - aluminum, copper, bronze, brass, plastics, resins and horn, eternit, slate, mica, hard rubber, etc. materials with friable chips

Crown drill / puncher / drill bit bi-metal Average: according to the selected variant Max. drilling depth: 38mm Cutting conditions - see the enclosed catalog sheet Suitable for drilling in: non-alloy steel, non-ferrous and light metals, plastics, plasterboard, reinforced boards, plywood and woodworking HSS bimetallic jigsaws with variable gearing. For easy-to-machine materials, the variable toothing ensures a more even tool passage and requires less effort. Thanks to lower vibrations and heat generation during cutting, up to three times longer service life is achieved. Suitable for non-alloy steels up to 700N / mm2, non-ferrous and light metals, plastics, plasterboard boards, reinforced boards, plywood and for working with wood.

Cobalt core drill / jig / drill bit bi-metal Average: according to the selected variant Max. drilling depth: 38mm Cutting conditions - see the enclosed catalog sheet Material: HSS Co8 (high speed steel with 8% cobalt) Fine tooth Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co 8 bimetal jigsaw. Fine gearing is very well suited for metals. It ensures a quieter operation and requires less effort. Due to less heat generation during cutting, the service life is extended, especially for metals. Suitable for alloy and common steels (up to 1100N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: MAS BT / JIS 6339 B - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change This mandrel can also be used in machines with manual tool change.

Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: hook wrench with tooth The key is not included in the package. Standard: JIS 6339 BT - automatic tool change Accuracy / throw - see the description of the selected variant Application: milling machines and CNC with exchanger type JIS 6339 MAS BT Alternatively, these chucks can also be clamped in machines with manual tool change

Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: hook wrench with tooth The key does not have to be part of the package - see photo or description of the selected variant Standard: JIS 6339 BT - automatic tool change Accuracy / throw - see the description of the selected variant Application: milling machines and CNC with exchanger type JIS 6339 MAS BT Alternatively, these chucks can also be clamped in machines with manual tool change

Carbide core drill / puncher / drill bit is made of one piece - including shank. Diameter: according to the selected variant (average tolerance 1mm) Drilling depth: 25mm It has powered carbide teeth, which allow easier drilling with less pressure force. Precise guidance is ensured by a removable guide drill with a diameter of 6 mm. The spring on the drill bit is used for easy removal of the drilled material. The guide drill is secured with an Allen key. The drill has a ground surface. The teeth are 3 mm wide, which ensures more economical drilling. The clamping shank is adapted for clamping in a three-jaw chuck. Application: Column drill , or hand drill with drills up to a diameter of about 40-50 mm - but it is necessary to keep the drilling axis and always keep all the cutting edges in engagement. If you do not keep all the blades in engagement or you are not able to keep the drill in the drilling axis (jerks, shocks, etc.), the carbide blade may be chipped - ie irreversible damage to the tool.