Drilling

Product count: 560
  • Passivated HSS drill for metal, ČSN 221121

    Passivated HSS drill for metal, ČSN 221121

    Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

    from 0,39 € with VAT
  • Grinded drill bit for metal HSS DIN338, 338RNHSS

    Grinded drill bit for metal HSS DIN338, 338RNHSS

    Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze

    from 0,67 € with VAT
  • Grinded drill bit for metal HSS TiN DIN 338, 338RNHSS TiN

    Grinded drill bit for metal HSS TiN DIN 338, 338RNHSS TiN

    Coated right-cut ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - see attached photo for lengths Blade angle: 118° Helix angle: 25-30° Material: HSS - High-speed steel Coating: TiN - Titanium Nitride Standard: DIN338 (replaces PN 2907 / PN2907) Usage : General - hand, stand, column drills Unalloyed and alloyed steel, cast steel with a strength of up to 900 N/mm2 Gray malleable cast irons, sintered ductile irons, short chip aluminum alloys, bronze

    from 2,08 € with VAT
  • Cobalt drill for metal HSSE Co5 DIN338, 338RTIHSSCo5

    Cobalt drill for metal HSSE Co5 DIN338, 338RTIHSSCo5

    Right-handed ground spiral cobalt drill for stainless steel with reinforced core and cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 130 ° Helix angle: 36 ° Material: HSSE - High speed steel + Co5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile.

    Price - On request
  • 3-pointed HSSE Co5 metal drill bit DIN338 , ProfiLine Vision , PTG

    3-pointed HSSE Co5 metal drill bit DIN338 , ProfiLine Vision , PTG
    * New item *

    3-edged right-cut ground spiral cobalt drill bit for steel and stainless steel with cylindrical shank Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths Material: HSSE - High speed steel + Co5 / HSSCo5 Standard: DIN338 (replaces PN 2907 / PN2907) Usage : Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages : Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.

    from 2,78 € with VAT
  • Cobalt drill for metal HSSCo8 PN2906, 338RNHSSCo8, StimZet

    Cobalt drill for metal HSSCo8 PN2906, 338RNHSSCo8, StimZet

    Right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Edge angle: 128 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 25-30 ° Material: HSSE - High speed steel + Co8 Standard: DIN338 (replaces PN 2906 / PN2906) Usage: General - hand, stand, column drills Titanium alloys Austenic steels resistant to corrosion, acids and heat High-strength and low-tensile steels with tensile strength up to 1200MPa Hardox 450 and Hardox 500 Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile. * Possibility of delivery with TiN or TiAlN coating.

    from 2,12 € with VAT
  • Metal drill with taper shank ČSN 221140

    Metal drill with taper shank ČSN 221140

    Taper shank drill, blackened, wrought Clamping shank: morse taper Material: HSS - high speed steel Standard: ČSN 221140

    from 4,92 € with VAT
  • Key type drill chuck with taper clamping, ČSN 241320

    Key type drill chuck with taper clamping, ČSN 241320

    Drilling head with handle - classic design Clamping range: according to the selected variant Clamping cone: according to the selected variant Clamping pins for these chucks can be found in related products. Standard: ČSN 241320 / CSN 24 1320

    from 2,99 € with VAT
  • Key type drill chuck HEAVY-DUTY with taper clamping , ČSN 241320

    Key type drill chuck HEAVY-DUTY with taper clamping , ČSN 241320
    Recommended ✓

    Drilling head with handle - industrial design Clamping range: according to the selected variant Clamping cone: according to the selected variant Ground jaws, very precise drill clamping Accuracy / throw: up to 0.2mm , robust, high-quality chuck design Clamping pins for these chucks can be found in related products. Standard: ČSN 241320 / CSN 24 1320

    from 8,69 € with VAT
  • Key type precision drill chuck with taper clamping , accuracy 0.15 mm

    Key type precision drill chuck with taper clamping , accuracy 0.15 mm
    Recommended ✓

    Přesná vrtací hlavička s kličkou s přesně broušenými čelistmi - profesionální provedení Upínací rozsah : dle zvolené varianty Upínací kužel : dle zvolené varianty Přesně broušené čelisti do špičky , velmi přesné upnutí vrtáku Ozubení je extra přesné , je taženo za studena. Kužel, klicka a dira na kličku jsou kalené. Přesnost / házivost : do 0,15mm , robustní, velmi kvalitní provedení sklíčidla , (běžná sklíčidla mají přesnost 0,35mm) Použití : Strojní stolní a sloupové vrtačky Upínací trny per tato sklíčidla najdete v souvisejících produktech. Norma : ČSN 241320 / CSN 24 1320

    from 10,51 € with VAT
  • Key type drill chuck with thread clamping , ČSN 241320

    Key type drill chuck with thread clamping , ČSN 241320

    Drilling head with handle - classic design Clamping range: according to the selected variant Clamping thread: according to the selected variant Clamping pins for these chucks can be found in related products. Application: Hand drills with thread clamping (Narex, Dewalt, Makita, Extol and other drills) Standard: ČSN 241320 / CSN 24 1320 If you are changing the chuck, look at the body of the existing chuck, the type of thread should be stamped on the body. If you are unsure, measure the thread diameter and respond.

    from 2,67 € with VAT
  • Taper shank drill HSSCo5, ČSN 221143

    Taper shank drill HSSCo5, ČSN 221143

    Drill with conical shank Average: according to the selected variant Material: HSSCo5 Standard: ČSN 221143, DIN345

    from 10,22 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Drilling