Dragging

Carbide (TK) milling cutter for grooving Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Progressive groove milling, hole drilling Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) grooving cutter Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 35° Other dimensions - see the attached catalog sheet Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Slotting cutter, the cutter has 1 cutting edge through the middle Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) slot milling cutter - uncoated Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated Usage: Progressive groove milling, hole drilling Suitable for milling steel and mild adhesive steels (aluminum, copper, brass, etc.) Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of blades: 2 pcs. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 55° Clamping shank: see attached catalog sheet Carbide: nano fine grain carbide Coating: without coating Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Progressive milling of grooves, drilling of holes Suitable for milling steel and soft sticky steels - aluminum, copper, brass, etc. Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves, short - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Standard: ZPS-FN Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: C100402

v

Carbide ( TK ) cutter for milling grooves, short - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 15° Other dimensions - see the attached catalog sheet Standard: ZPS-FN Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Aluminium, Al-Si alloys with Si content < 6% with strength up to 400N/mm2 Al-Si alloy with Si content