Dead and live centers

Cylindrical insert for fixed tips VDK-15-MT4, VDK-23-MT4 and VDK-32-MT4 Clamping diameter: 40mm( cylindrical) < br> Inner cone: MK4 Overall length: 75mm Collar width: 10mm Ord. Ä. : 5001-105

Clamping cone: MK4 Clamping range of set: 15-45mm Diameter of center points: 6mm / 8mm / 10 mm Diameter Cutting parts: 16mm / 23mm / 30mm To clamp the workpiece(wood, plastic, etc.) between the points, it is clamped to the lathe spindle directly or directly es reduction sleeve. A rotating tip is suitable for the quill of the tailstock. Before clamping the workpiece, it is necessary to drill the middle lengths into it first.

Replacement tip / attachment pr. 6mm tip angle: 60Â ° Material: tool steel - marked according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 8mm tip angle: 60Â ° Material: tool steel - marked according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 10mm tip angle: 60Â ° Material: tool steel - marking according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 12,6mm tip angle: 60Â ° Material: tool steel - marking according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 6mm tip angle: 60Â ° Material: tool steel - marked according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 8mm tip angle: 60Â ° Material: tool steel - marked according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 10mm tip angle: 60Â ° Material: tool steel - marking according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 12,6mm tip angle: 60Â ° Material: tool steel - marking according to DIN: 25CrMo4, hardened, ground

Replacement tip / attachment pr. 12,6mm tip angle: 60Â ° Material: tool steel - marking according to DIN: 25CrMo4, hardened, ground

Morse 2 Taper Cone (MK II) Angle of Tip: 60 ° Tip Diameter: 25mm Tip Length 30mm Body Diameter: 45mm Length of Cone Morse MK2: 68mm < br> Total length 130mm Number of bearings: 3 Speed ??selection according to Fig. 2 Max. Circular run: 0,006mm Rotary tip has two ball bearings one needle bearing