Cylindrical front

Carbide ( TK ) roughing cutter long - made of cemented carbide Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527K, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Air cooling. Coating: PVD ( AlCrN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S119602N

Carbide ( TK ) roughing cutter long - from cemented carbide with weldon surface Number of blades: according to the selected variant Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527K, DIN 6535 HB Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S119612

Carbide ( TK ) milling cutter for universal milling, long - made of cemented carbide Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Suitable also for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo Order no. No. - series: S121602

Carbide ( TK ) universal milling cutter short - from cemented carbide, two cutting edges in the center Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Corner radius: according to the selected variant Helix angle: 35° / 38° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6527L Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Automatic and structural steel (group 1) up to 600 MPa Automatic and structural steel (group 3) up to 1100 MPa Automatic and structural steel (group 5) up to 1100 MPa Stainless steel (group 1) up to 750 MPa Stainless steel (group 2) 750-850 MPa Cast iron (group 1) up to 820 MPa Cast iron (group 2) above 800 MPa Refractory steel (Cr-Ni alloys) up to 1500 MPa Refractory steel (Titanium and its alloys) up to 1250 MPa Hardened steel up to 54HRC - up to 1920 MPa Hardened steel up to 60HRC - up to 2210 MPa Cutting conditions - see attached photo or catalog sheet Order no. No. - series: S141612R

Carbide ( TK ) universal milling cutter long - from cemented carbide, two cutting edges in the center Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 35° / 38° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6527L Coating: PVD ( AlTiN ) Usage : Automatic and structural steel (group 1) up to 600 MPa Automatic and structural steel (group 3) up to 1100 MPa Automatic and structural steel (group 5) up to 1100 MPa Stainless steel (group 1) up to 750 MPa Stainless steel (group 2) 750-850 MPa Cast iron (group 1) up to 820 MPa Cast iron (group 2) above 800 MPa Refractory steel (Cr-Ni alloys) up to 1500 MPa Refractory steel (Titanium and its alloys) up to 1250 MPa Hardened steel up to 54HRC - up to 1920 MPa Cutting conditions - see attached photo or catalog sheet Order no. No. - series: S141612X

Carbide ( TK ) milling cutter for trochoid milling long - from cemented carbide, two cutting edges in the center Number of blades: 5 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Corner radius: according to the selected variant, possibly with a bevel of 45° 0.1-0.5mm Helix angle: 41° / 42° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Stainless steels (group 1) up to 750 MPa Stainless steels (group 2) 750-850 MPa Titanium and titanium alloys up to 1250 MPa Cutting conditions - see attached photo Order no. No. - series: S143502T

Carbide (TK) milling cutter for roughing, straight face, cutting edges through the center, with weldon face Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Helix: 45 ° Other dimensions - see enclosed catalog sheet Coating: TiCN Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius or a longer blade.

Carbide (TK) milling cutter for roughing, straight face, cutting edge through the center Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Number of edges: 5br. Helix: variable, to reduce vibration Other dimensions - see enclosed catalog sheet Coating: BIGAAN Standard: DIN6535 Application: steel up to 1600 MPa, stainless steel and heat-resistant steel (Hastelloy, Hardox, etc.) Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius, longer blade, different clamping diameter.

Carbide (TK) cutter, straight face, cutting edge through the center Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Number of edges: 5br. Helix: variable, to reduce vibration Other dimensions - see enclosed catalog sheet Coating: triple Cr coating Standard: DIN6535 Application: stainless steel and classic steel up to 1600 MPa, Hastelloy, Hardox etc. Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius, longer blade, different clamping diameter.

Carbide (TK) milling cutter for hardened steel milling, type HRD Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Other dimensions - see enclosed catalog sheet Coating: special three-layer coating + tumbling Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the weldon face / corner radius / longer blade / clamping diameter / internal cooling in the middle or in a helix.

Honeycomb cutter Three-sided, non-symmetrical, for machining in three axes Material K30: for machining materials that produce a short, crumbly chip. Especially for gray cast iron, non-ferrous alloys, non-metallic materials Diameter 10mm Shank diameter: 12mm Overall length: 83mm Cutter length: 26mm