Cutters

Screw Milling Screw Thread Size: M3,5 Head: TORX 15 Overall Length (With Head): 9mm US 3510-T15 Appropriate for these PRAMET holders: SCACR / L 1212 F 09; SCACR / L 1616 H 09; SCBCR / L 1212 F 09; SCBCR / L 1616 H 09; SCFCR / L 1212 F 09; SCFCR / L 1616 H 09; SCLCR / L 1212 F 09; SCLCR / L 1616 H 09; SDJCR / L 1212 F 11; SDJCR / L 1616 H 11; SDJCR / L 2020 K 11-M-A; SDJCR / L 2525 M 11-M-A; SDNCN 1212 F 11; SDNCN 1616 H 11; SDNCN 2020 K 11-M-A; SDNCN 2525 M 11-M-A; SRDCN 2020 K 1003-M-A; SRDCN 2020 K 10-M-A; SRDCN 2525 M 10-M-A; SRDCN 2525 M 12-M-A; SRDCN 3225 P 10-M; SRDCN 3225 P 12-M; SRSCR / L 2020 K 10-M-A; SRSCR / L 2525 M 10-M-A; SRSCR / L 3225 P 10-M; SRSCR / L 3225 P 12-M; SSBCR / L 1212 F 09; SSBCR / L 1616 H 09; SSDCN 1212 F 09; SSDCN 1616 H 09; SSKCR / L 1212 F 09; SSKCR / L 1616 H 09; STFCR / L 2020 K 16-M-A; STFCR / L 2525 M 16-M-A; STJCR / L 2020 K 16-M-A; STJCR / L 2525 M 16-M-A; SWLCR / L 1616 H 06; SWLCR / L 2020 K 06; S20S-SCKC R / L 09; S25T-SCKC R / L 09; A20Q-SCLCR / L 09; S20S-SCLCR / L 09; A25R-SCLCR / L 09; S25T-SCLCR / L 09; S20S-SDQCR / L11; A20Q-SDQCR / L11; S25T-SDQCR / L11; A25R-SDQCR / L11; S20S-SDUCR / L11; A20Q-SDUCR / L11; S25T-SDUCR / L11; A25R-SDUCR / L11; S32U-SDUCR / L 11-A; A32S-SDUCR / L11-A; S20Q-SDZCR / L 11-93; S25R-SDZCR / L 11-93; S32S-SDZCR / L 11-93-A; S40T-SDZCR / L 11-93-A; S20S-SSSCR / L 09; S25T-SSSCR / L 09; A25R-ST FCR / L 16; S25T-ST FCR / L 16; A32S-ST FCR / L 16; S32U-ST FCR / L 16-A; S25T-SVQCR / L16; S32U-SVQCR / L 16; S25T-SVUCR / L 16; S32U-SVUCR / L 16; A20Q-SWLCR / L 06; S20S-SWLCR / L 06; A25R-SWLCR / L 06; A25R-SWLCR / L 08; S25T-SWLCR / L 06 Tightening torque: 3Nm

3512A-T15P 3512A-T15P Suitable for these PRAMET holders: SER / L 2020 K 16 SER / L 2525 M 16 SER / L 3225 P 16 SIR / L 1820 P 16 SIR / L 2325 Q 16 SIR / L 2532 S 16 Tightening torque: 3Nm

Force screw in the knife holder. Thread Size: M3.0 Head: TORX 8 Overall length of bolt (with head): 7.3mm

Force screw in the knife holder. Thread Size: M2,5 Head: TORX 8 Overall length of bolt (with head): 5,5mm

Unused - symmetrical double-sided angled end mill with underturned teeth Angle: 30° Diameter of the cutter: 160mm Diameter of the clamping hole: 32mm Width: 25mm Number of teeth: 22 Radius at the top: R2.5 Material: HSS - High-speed steel ČSN 222252.1 / 22 2252.1 Resale - over-standard stocks

Force screw in the knife holder. Thread Size: M2 Head: TORX 6 Overall length of bolt (with head): 5mm

Interchangeable ADKT 1505PDER SCM BH68TL Milling Cutter, VBD for Milling Very low cutting resistance due to cutting edge geometry, high quality machined surface. Plate is coated, it has a high lifetime even when milling of workable (high alloy) steels. Dimensions: l = 15,55mm d = 9,525mm s = 5,6mm d1 = 4,4mm Original Packaging Usage: Steel, stainless steel, cast iron

Interchangeable ADKX 1505PD-R; 4020, VBD for milling Plate is coated, it has a high lifetime even when milling of workable (high alloy) steels. Dimensions: l = 15,55mm d = 9,525mm s = 5,6mm d1 = 4,4mm Original Packaging Usage: Steel: P25-P40; 255-190 rpm; 0,05-0,12 m / t; 1,0-9,0 mm Stainless steel: M25-M40; 150-110ot / min; 0,05-0,12 m / t; 1,0-6,8 mm Cast iron: K25-K40; 240-180 rpm; 0,05-0,12 m / t; 1.0-9.0 mm Supersulins S20-S30; 75-35 rpm; 0,05-0,12 m / t; 1.0-5.4 mm

APGT 1604PDER ALU PL05, VBD milling cutter for milling aluminum, copper and their alloys Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Original Pack Usage: Aluminum, Copper, Plastics These VBDs are Fully compatible with VBD type APKT 1604 and APKX 1604 Vc: 210-1150 m / min fz: 0,09-0,40 mm ap: 15mm

Interchangeable milling insert APKT 100308PDTR M01, insert for milling Radius: 0.8mm Usage: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbides The price is for 1 piece, not for the whole package, if you want to buy the whole package , put 10pcs in the basket.

Interchangeable milling insert APKT 100312PDTR M01, insert for milling Radius: 1.2mm Usage: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbides The price is for 1 piece, not for the whole package, if you want to buy the whole package , put 10pcs in the basket.

Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Application: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbide Cutting conditions - see enclosed PDF sheet