Cutters for PCBs, graphite and composites
-
Carbide cutter for composite materials 6fl. 25 ° TiAlN, CERANIT
Carbide (TK) milling cutter for milling composite materials / micro drill for printed circuit boards Number of edges: 6br. (2 points at the head) Diameter of the working part: according to the selected variant, tolerance h10 Helix: 25 ° DIN 6535 HA Carbide: K20 / 30 fine-grained carbide Coating: uncoated Usage: Suitable for machining - engraving: printed circuit boards, fiberglass, polyamide, Teflon, acrylates, gold, silver, brass, copper, plastics, graphite and mineral fiber boards The version with a drilling edge as in the photo has only a cutter dia. 3.15mm - 20.315 TiAlN. Other diameters are not drilled - the milling hole must first be pre-drilled.
8,18 € with VAT -
Carbide cutter for composite materials 5fl. 25 ° TiAlN, CERANIT
Carbide (TK) milling cutter for milling composite materials / micro drill for printed circuit boards Number of edges: 5br. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 25 ° DIN 6535 HA Carbide: K20 / 30 fine-grained carbide Coating: uncoated Usage: Suitable for machining - engraving: printed circuit boards, fiberglass, polyamide, Teflon, acrylates, gold, silver, brass, copper, plastics, graphite and mineral fiber boards
from 8,18 € with VAT -
Carbide cutter for composite materials, Karnasch
Carbide ( TK ) milling cutter for milling, grooving, contouring of composite materials / without front edges / series 116001 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.
from 15,26 € with VAT -
Carbide cutter for composite materials, with end cut , Karnasch
Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with front edges / series 116002 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.
from 16,73 € with VAT -
Carbide cutter for composite materials, 2-fl. , Karnasch
Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with two front edges / series 116003 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.
from 16,04 € with VAT -
SK cutter for composite materials, tip 135°, Karnasch
Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with drill tip / series 116004 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.
from 17,06 € with VAT
