Collet chucks with flange
-
Collet chuck ER32 with flange diameter 80mm(without collets)
Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Handle: up to 0,005mm Collets can be ordered separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Proma SM 300 E
In stock70,40 € with VAT -
Collet chuck ER25 with flange diameter 100mm(without collets)
Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm Running: up to 0,005mm Collets can be purchased separately as needed. Colts are not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
On request54,28 € with VAT -
Collet chuck ER32 with flange diameter 100mm(without collets)
Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Running: up to 0,005mm Collets can be ordered separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
In stock78,25 € with VAT -
Collet chuck ER32 with flange diameter 125mm(without collets)
Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Handle: up to 0,005mm Collets can be purchased separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
On request85,55 € with VAT -
Collet clamp 5C dia. 125mm, Camlock D3 clamping
Collet universal chuck for 5C collets with Camlock size 3 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D3 ( Cone diameter Dmax=53.90mm ; 3x pin on circle 70.60mm) Clamp height: 123mm Total height including D3 pins: 150mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.
In stock283,90 € with VAT -
Collet clamp 5C dia. 125mm, Camlock D6 clamping
Collet universal chuck for 5C collets with Camlock size 6 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D6 ( Cone diameter Dmax=106.30mm ; 6x pin on a circle 133.40mm) Clamp height: 145mm Total height including D5 pins: 190mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.
In stock372,57 € with VAT -
Collet clamp 5C dia. 125mm, Camlock D8 clamping
Collet universal chuck for 5C collets with Camlock size 8 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D8 ( Cone diameter Dmax=139.70mm ; 6x pin on a circle 171.40mm) Clamp height: 155mm Total height including D5 pins: 195mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.
In stock391,63 € with VAT -
Collet chuck ER32 with flange diameter 80mm with a set of 10 collets
Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handlery: up to 0.005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Passes directly on the lathe flange: - ASIST PLATINUM PRO AE4S50M MINI LATHE - Proma SM 300 E
On request152,91 € with VAT -
Collet chuck ER25 with flange diameter 100mm with a set of 7 collets
Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm < Collet clamping procedure: Click the clamping nut into the clamping nut - as shown in the picture. Suitable for lathes - instead of a universal chuck
On request104,36 € with VAT -
Collet chuck ER32 with flange diameter 100mm with a set of 10 collets
Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0,005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
On request160,76 € with VAT -
Collet chuck ER32 with flange diameter 125mm with a set of 10 collets
Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0.005mm Other bracelets can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
On request168,06 € with VAT
