Collet chucks and collets
-
Morse
-
Steep ISO cone
-
HSK
-
Preparation - to the vise
-
ER clamps with cylindrical shank
-
Clamps - Bushings (J&L)
-
Collets
-
Accessories
-
Collet chuck MK2 x ER32 with a set of 15 collets, nut T2
Morse Clamp Clamp MK 2 x ER32 15 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A
On request177,01 € with VAT -
Collet chuck MK3 x ER20 with a set of 8 collets, nut T1
Clamp Clamp Clamp with MK 3 x ER 20 8 Clamps MK3xER20 (3xER20) Clamping Thread in Cone M12 Max. collar size: 13mm Other collet sizes can be purchased separately Contains collet: 1,5-2mm; 2-3mm; 3-4mm; 4-5mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm Supplied in Plastic Trunk Thread: up to 0.005mm Clamping Procedure: Fasten the clamp nut to the clamping nut - according to the attached picture. DIN 228A
In stock110,87 € with VAT -
Collet chuck MK3 x ER25 with a set of 6 collets, nut T2
Clamp Clamp with MK Cone MK 3 x ER 25 6 Clamps MK3xER25 (3xER25) Clamping Thread in Cone M12 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A
In stock87,79 € with VAT -
Collet chuck MK3 x ER32 with drive nut
Clamp Clamp with morse cone MK 3 x ER 32 MK3xER32 (3xER32) Max. Collar Size: 20mm Bolt Threaded Bolt / Bolt: M12 Bolt Nut Diameter: 49mm For Collet Outer Diameter: 32mm Thread: up to 0.005mm ER32 Collet Can be purchased. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. DIN 228A
In stock38,78 € with VAT -
Collet chuck MK3 x ER32 with a set of 6 collets, nut T2
Clamp Clamp with Morse Cone MK 3 x ER 32 6 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case < :
In stock101,40 € with VAT -
Collet chuck MK3 x ER32 with a set of 15 collets, nut T2
Clamp Clamp with Morse Cone MK 3 x ER 32 15 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case < :
In stock177,02 € with VAT -
Collet chuck MK3 x ER40 with a set of 8 collets, nut T2
Clamp Clamp with Morse Cone MK 3 x ER 40 8 Clamps MK3xER40 (3xER40, MK3 / ER40) Max. Collet Size: 30mm Set of Collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :
In stock134,35 € with VAT -
Collet chuck MK4 x ER25 with a set of 6 collets, nut T2
Clamp Clamp with MK Cone MK 4 x ER 25 6 Clamps MK4xER25 (4xER25) Clamping Thread in Cone M16 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A
In stock90,83 € with VAT -
Collet chuck MK4 x ER32 with a set of 6 collets, nut T2
Morse clamp clamp MK 4 x ER 32 6 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A
In stock105,45 € with VAT -
Collet chuck MK4 x ER32 with a set of 15 collets, nut T2
Morse clamp clamp MK 4 x ER 32 15 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A
In stock181,09 € with VAT -
Collet chuck MK4 x ER40 with a set of 8 collets, nut T2
Morse Clamp Clamp MK 4 x ER 40 8-Clamp MK4xER40 (4xER40) Other Collet Clamps can be purchased separately Max. collet size: 30mm Set includes collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :
In stock136,31 € with VAT -
Clamping sleeve JAL 16mm MK4, thread M16, ČSN 241492, used
Clearance saleClamping sleeve 4x16 with morse and thread taper shank Clamping cone: MK 4 Clamping thread: M16 Clamping range: 3 - 10 mm Head diameter: 43 mm Tool length Outside Spindle: 50mm Overall Length: 174 mm Hook Wrench: Hole 8mm x Diameter 44mm Standard: ČSN 24 1492 Usage: br> Milling machines - for clamping of milling cutters, drills and other tools with cylindrical shank The head is used, undamaged, bearing and clamping cone in order, thread intact, fully functional
On request19,59 € with VAT