Carbide end mills

Carbide ( TK ) copying - ball mill, long - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Radius: according to the selected variant (D/2) Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Non-ferrous metals up to 250 MPa Aluminum alloys up to 530 MPa Hardenable (hardened) steels Cutting conditions - see attached photo Order no. No. - series: S511602

Carbide copying (TK) milling machine for radii Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Cutting angle of spherical end: 220 ° For other dimensions, see the attached photo. Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, hardened materials, stainless steels Cutting conditions - see attached photo

Carbide copying (TK) milling cutter for long radii Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° For other dimensions, see the attached photo. Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, hardened materials, stainless steels Cutting conditions - see attached photo

Carbide (TK) corner milling cutter for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steel Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide roughing ( TK ) milling cutter with interrupted edge Number of blades: 4 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 30° Clamping shank: see attached catalog sheet Carbide : super fine grain carbide Coating: PVD ( AlTiN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Type NR - Roughing milling with the resulting machining Ra 12.5 and rougher, the cutter has 2 cutting edges through the middle. Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 55 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 43 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Rough milling, roughing cuts on the cutter leave no traces, the cutter has 2 cutting edges through the center, reinforced core Suitable for machining tough steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for milling composite materials / micro drill for printed circuit boards Number of edges: 6br. (2 points at the head) Diameter of the working part: according to the selected variant, tolerance h10 Helix: 25 ° DIN 6535 HA Carbide: K20 / 30 fine-grained carbide Coating: uncoated Usage: Suitable for machining - engraving: printed circuit boards, fiberglass, polyamide, Teflon, acrylates, gold, silver, brass, copper, plastics, graphite and mineral fiber boards The version with a drilling edge as in the photo has only a cutter dia. 3.15mm - 20.315 TiAlN. Other diameters are not drilled - the milling hole must first be pre-drilled.

Carbide (TK) milling cutter for milling composite materials / micro drill for printed circuit boards Number of edges: 5br. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 25 ° DIN 6535 HA Carbide: K20 / 30 fine-grained carbide Coating: uncoated Usage: Suitable for machining - engraving: printed circuit boards, fiberglass, polyamide, Teflon, acrylates, gold, silver, brass, copper, plastics, graphite and mineral fiber boards

Carbide ( TK ) cutter for milling grooves, short - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Standard: ZPS-FN Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: C100402

Carbide ( TK ) milling cutter for universal milling Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Screw: 30° Other dimensions - see the attached catalog sheet Carbide: K20 F - ultra fine-grained carbide Coating: without coating Usage : Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Suitable also for thermal and hydro clamping Cutting conditions - see attached photo Order no. No. - series: C120602

v

Carbide ( TK ) cutter - from cemented carbide, 1 cutting edge through the center - suitable for ALU, AL-alloys and non-ferrous metals Number of blades: 3 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Version without weldon surface / with weldon surface: depending on the selected variant Helix angle: 45° Head angle: 15° Other dimensions - see the attached catalog sheet Coating: without coating Usage: Type W - for machining soft tools, e.g. aluminum and non-ferrous metals. Aluminum, Al-Si alloys (Si < 6%) Al-Si alloys (Si < 12%) Copper, copper alloys, brass and bronze Cutting conditions - see attached photo or catalog sheet Order no. no.: series S111402 and S111412