Carbide drills
-
Carbide NC 90 ° drill for metal K20 / K30 PVD, CERANIT
Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 90 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation
from 8,88 € with VAT -
Carbide NC 120 ° drill for metal K20 / K30 PVD, CERANIT
Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 120 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation
from 8,88 € with VAT -
Extended carbide NC drill for metal K20/K30
Right-cut ground carbide extended NC drill with cylindrical shank Drilling diameter: according to the selected variant Total length: 120mm Blade angle: according to the selected variant Helix angle: 30° Material: Carbide - carbide / carbide K20 / K30, DIN6535 No coating Usage : Special drill for positionally accurate and fast drilling on NC / CNC machines, coordinate boring machines, etc. For centering and chamfering the edge of a thread hole in one operation If you need a different diameter, length or angle, ask us, we will be happy to offer.
from 39,03 € with VAT -
Carbide drill 12xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 12D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 111,05 € with VAT -
Carbide drill diameter tolerance m7 140 ° for drilling 55-70HRC, Karnasch
Carbide drill for hardened steel TK / HA / PVD 22.0468 Average: according to the selected variant Blade diameter tolerance: m7 (plus tolerance) Helix angle: 15 ° Tip angle: 140 ° Coating: Balinit Hardlube Carbide: Micro-grain Norma: Karnasch Usage: For hardened materials - steels up to 70 HRC Cutting conditions - see attached PDF
from 48,10 € with VAT -
Carbide drill 140 ° for drilling 55-70HRC, Karnasch
Carbide drill for hardened steel TK / HA / PVD 22.0468xxxx0xx Average: according to the selected variant Helix angle: 15 ° Tip angle: 140 ° Coating: Balinit Hardlube Carbide: Micro-grain Norma: Karnasch Usage: For hardened materials - steels up to 70 HRC Cutting conditions - see attached PDF
from 77,66 € with VAT -
Collet chuck HSK A63xER40-100 DIN69893 A balanced G2.5/30000 rpm
NC collet holder HSK A 63 ER 40 - 100 mm Type: HSK A63 ER32 AD - cooling guided through the center Length from cone to holder: 80 mm Max. collet size: 30mm For collets with an outer diameter: 40mm Clamping nut diameter: 63mm Clamping stem design for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)
In stock71,01 € with VAT -
Lathe knife S25S STUCR 16 for hole
S25S STUCR16 90 ° S25S Interchangeable Socket Socket S25S -STUCR16 93 ° Slicer Socket Cutter: 25mm Diameter Front Angle: 0 ° Angle of Blade: -7 ° Overall length of knife: 250mm Replacement plates are marked TC .. 16T3 .. (ie TCMT 16T3 .., TCGT 16T3 .. etc.) The key is provided with the key for the change of the slicer.
In stock38,08 € with VAT
