Carbide drills

Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 90 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Right-handed ground carbide short NC drill with cylindrical shank Drilled diameter: according to the selected variant Drill length: see attached photo Edge angle: 120 ° Helix angle: 30 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Right-cut ground carbide extended NC drill with cylindrical shank Drilling diameter: according to the selected variant Total length: 120mm Blade angle: according to the selected variant Helix angle: 30° Material: Carbide - carbide / carbide K20 / K30, DIN6535 No coating Usage : Special drill for positionally accurate and fast drilling on NC / CNC machines, coordinate boring machines, etc. For centering and chamfering the edge of a thread hole in one operation If you need a different diameter, length or angle, ask us, we will be happy to offer.

Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 12D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill for hardened steel TK / HA / PVD 22.0468 Average: according to the selected variant Blade diameter tolerance: m7 (plus tolerance) Helix angle: 15 ° Tip angle: 140 ° Coating: Balinit Hardlube Carbide: Micro-grain Norma: Karnasch Usage: For hardened materials - steels up to 70 HRC Cutting conditions - see attached PDF

Carbide drill for hardened steel TK / HA / PVD 22.0468xxxx0xx Average: according to the selected variant Helix angle: 15 ° Tip angle: 140 ° Coating: Balinit Hardlube Carbide: Micro-grain Norma: Karnasch Usage: For hardened materials - steels up to 70 HRC Cutting conditions - see attached PDF

NC collet holder HSK A 63 ER 40 - 100 mm Type: HSK A63 ER32 AD - cooling guided through the center Length from cone to holder: 80 mm Max. collet size: 30mm For collets with an outer diameter: 40mm Clamping nut diameter: 63mm Clamping stem design for aut. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

S25S STUCR16 90 ° S25S Interchangeable Socket Socket S25S -STUCR16 93 ° Slicer Socket Cutter: 25mm Diameter Front Angle: 0 ° Angle of Blade: -7 ° Overall length of knife: 250mm Replacement plates are marked TC .. 16T3 .. (ie TCMT 16T3 .., TCGT 16T3 .. etc.) The key is provided with the key for the change of the slicer.

Self-locking, quick-release, without loop, type SOLID quick-release drill head without handle, up to 16mm Cutting jaws, professional quality. For drilling: 1-16mm Clamping cone: B18 Body diameter: 56mm, total height 100mm MK1, Main Usage: Stand and Column Drills Accuracy: up to 0.12mm

This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head, after landing on the knife surfaces, settle the blade in the correct position and axial height of 16 mm. After inserting a knife with a 6mm shank and an exchangeable plate into this holder, you will therefore achieve a blade height of ( axial height) 16mm. If you have a lathe for knives with an axial height higher than 12mm, you must add adequate pads under the holder. Length of holder: 77mm Width: 18mm Height: 24mm Photo is illustrative, shows holder for larger knife

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Practical Hinged Pivot Wrench for 10mm and 12mm Screws Material: Cr-V, Chrom-Vanadium