Obrážecí hlavy a nástavce
-
Slotting head with cylindrical shank for slotting multi-edged holes
Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping cylindrical shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 464,60 € with VAT -
Slotting head with Morse taper for slotting multi-edged holes
Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping conical morse shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 1.021,88 € with VAT -
Slotting head DIN69871 for slotting multi-edged holes
Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping shank - steep taper ISO, DIN69871: size according to selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 1.150,09 € with VAT -
Slotting head VDI for slotting multi-edged holes
Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping shank VDI: size according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 1.035,02 € with VAT -
Hexagonal slotting adapter HSS/HSSE-PM
Forming attachment - hexagonal punch Attachment size / for shaping heads: according to the chosen variant Hexagon size: depending on the selected option Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and for stamping steels with higher strength + stainless steel. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 43,67 € with VAT -
Square slotting adapter HSS/HSSE-PM
Forming attachment - square punch Attachment size / for shaping heads: according to the chosen variant Hexagon size: depending on the selected option Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and for stamping steels with higher strength + stainless steel. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 43,67 € with VAT -
Torx slotting adapter HSS/HSSE-PM
Forming attachment - torx punch Attachment size / for shaping heads: according to the chosen variant Torx size: according to the chosen variant Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa For series production and for stamping steels with higher strength + stainless steel, we recommend punches made of sintered steel HSSE-PM. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 83,50 € with VAT -
Extended hexagonal slotting adapter HSS/HSSE-PM
Extended imaging attachment - hexagonal punch Size of attachment / for imaging heads: according to the selected variant Hexagon size: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These extended imaging attachments are only suitable for imaging heads of the type with the same designation as the attachment, i.e. G16M / G16L. Use in another head is not recommended - possibly on request. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 72,03 € with VAT -
Extended square slotting adapter HSS/HSSE-PM
Extended imaging attachment - square punch for G16M / G16L heads Size of attachment / for imaging heads: according to the selected variant Hexagon size: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These extended imaging attachments are only suitable for imaging heads of the type with the same designation as the attachment, i.e. G16M / G16L. Use in another head is not recommended - possibly on request. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
On requestPrice - On request -
Long hexagonal slotting adapter HSS/HSSE-PM
Long imaging attachment - hexagonal punch Size of attachment / for imaging heads: according to the selected variant Hexagon size: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These long imaging extensions can only be clamped and imaged correctly in an adjustable imaging head type G12A. With the ordinary G12 head, it is not possible to adjust the imaging depth, and the attachment or the imaging head may be damaged. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 116,17 € with VAT -
Long square slotting adapter HSS/HSSE-PM
Long image attachment - square punch Size of attachment / for imaging heads: according to the selected variant Size of the square: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These long imaging extensions can only be clamped and imaged correctly in an adjustable imaging head type G12A. With the ordinary G12 head, it is not possible to adjust the imaging depth, and the attachment or the imaging head may be damaged. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 116,17 € with VAT -
Broaching head BR-G8-C-20 for broaching square holes
Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-10mm 4-edge: 1-8mm TORX: T3-T40 TORX PLUS: IP6-IP40 For broaches type: G8(with 8mm shank) Head diameter: 35mm Head length(without driver): 46mm Clamping shank: 20mm, with with a flat surface for a weldon clamp Other dimensions - see the attached catalog sheet This head is without a securing shaft - securing is not necessary for the broaching of small short profiles. Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400 MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.
On request648,21 € with VAT