Accessories for CN lathes
-
Improved vernier of longitudinal displacement with measuring to Chinese lathes Proma, Asis
PROFI set measuring the feed of the main support for Chinese lathes with adjustable scale - vernier / with adjustable zero - fast adjustment The set has an adjustable one compared to the original. vernier - possibility to set zero according to the need for locking with a spindle screw at the front of the wheel. One length = 0,1mm (on the original wheel could not count) Main wheel rotation = 20mm(Original wheel 19,1986mm) Vernier has 200 lengths with a diameter of 63mm, one length marks 0.1mm feed. The description is from the number 0 to 19 mm a total of 20 mm per turn in the direction of rotation in ascending order. The front case also serves as a countertop vernier. The whole set has a powerful impression and is also very stiff compared to Chinese plastic handwheels due to the chosen materials. Suitable for 300 series lathes - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and many other clones
In stock313,39 € with VAT -
Additional support 100x125 for hobby lathe
Additional support - milling support, support for hobby lathes Clamping area: 100x125mm Axial feed - aligned with base plate: 65mm Axial feed - maximum !LnA: 80mm Vernier: 1 length of vernier 0,02mm, 1x turn = 2mm Base: 92x80mm Mounting holes: 2x 10mm, pitch 41mm T-grooves: 3x T10, pitch 40mm Bronze nut, feed bronze nut. Prismatic guide with delimiter bar and feed lock option. Application: Mounted on the cross support of the lathe.
In stock147,38 € with VAT -
Additional support 50x90 for hobby lathe
Additional support - milling support, support for hobby lathes Clamping area: 50x90mm Axial feed - aligned with base plate: 30mm Axial feed - maximum f!LnAf: 54mm Vernier: 1 length of vernier 0,03mm, 1x turn = 1,5mm Base: 57x50mm Mounting holes: 2x 5mm, pitch 22mm T-grooves: 3x T5,5, pitch 25,5mm 2x T4 on the sides Part is a simple clamping plate. Bronze nut, feed with bronze nut. Prismatic guide with delimiter bar and feed lock option. Application: Mounted on the cross support of the lathe.
In stock76,47 € with VAT -
Milling support for lathe 70x150mm
MN80 Lathe Milling Machine Lathe Chinese Clamping surface 70x150mm Axial displacement approx. 80mm 1 piece nonius 0,02mm, 1x turning = 1mm Slot: 3xT10 Distance from the rear edge to the hole axis: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking system Adjustable axial clearance of the bolt bearing The surfaces of the product are carefully angled and ground, all sliding function surfaces are scraped Material: Angle holder and T-shaped table with C-25 gray cast iron Nonius, handle and fastener is made of steel Screw feed is of strength steel Usage: MN80 lathe, or even for other lathes. If you want to use support on another lathe (Rotwerk, Asist, Proma, Quantum, Bernardo and others), please send us a dimensioned drawing of your lathe's knife holder. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.
On request521,01 € with VAT