1 tooth over the middle
-
Short end mill HSSCo8 , 1 tooth through the center , type N
Recommended ✓End mill, 1 tooth through the center with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN1835 A / DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 120508 and 120518
from 5,88 € with VATup to -30% -
Long end mill HSSCo8 weldon , 1 tooth through the center , type N
Recommended ✓End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 121518
from 13,93 € with VAT -
End mill HSSE-PM weldon , 1 tooth through the center , type N
Recommended ✓End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 120517 and 121517
from 18,71 € with VAT -
Roughing end mill 4-fl. HSSCo8 TiN weldon
Recommended ✓Four-edged roughing end mill, four-edged / four-toothed with weldon surface Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Number of blades: 4 Material: HSSCo8 - High speed steel + 8% cobalt Coating: TiN - Titanium Nitride
from 9,79 € with VAT -
End mill HSSCo8 weldon , 1 tooth through the center , type NR
Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Order no. code - series: 124518 and 125518
from 23,63 € with VAT -
End mill HSSCo8 weldon, 1 tooth through the center , type NR-F
Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR-P : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. Order no. code - series: 124518P and 125518P
from 25,05 € with VATup to -20% -
End mill HSSCo8 weldon , 1 tooth cut through the center , type HR
Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518 and 129518
from 25,54 € with VATup to -10% -
End mill HSSCo8 weldon , 1 tooth cut through the center , type HR-F
Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR-F: For machining materials with medium to higher strength (up to 1200 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the functions of a roughing and finishing tool. Order no. code - series: 128518P and 129518P
from 26,87 € with VAT -
End mill HSSE-PM weldon , 1 tooth through the center , type NR
Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSE-PM, AlTiN polish Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 124517 and 125517
from 32,09 € with VAT -
Extra short end mill HSSCo8 weldon , 1 tooth cut through the center , type HR
Roughing extra short end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Extra short row => higher stiffness Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518S
from 23,80 € with VAT -
Set 4br. milling cutter 4-12mm - series 120518 - HSS Co8 weldon, 1 tooth through the cente
Set of short four-edged cutters with a cross-section item(drill) with weldon face Set contents: 4x11, 5x13, 6x13, 8x19, 10x22, 12x26 mm Tolerance of cutting diameter accuracy: k10 Clamping shanks: 6mm(d4 d5 d6), 10mm(d8 d10), 12mm(d12) Number of threads itA… —: 4 bA… â „c. Material: HSSCo8(contains 8 packages) Standard: DIN 1835 B, DIN 844 N, ISO 1641, ISO 222130(CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Fig. 2) Ord. Code: 120518.SET4-12
On request87,91 € with VAT -
Set 4br. cutter 6-20mm - series 120518 - HSS Co8 weldon, 1 tooth through the center, type
Set of short four cutters with item over center(drill) with weldon face Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Tolerance of cutting diameter accuracy: k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of nights: 4 days. Material: HSSCo8(contains 8 packages) Standard: DIN 1835 B, DIN 844 N, ISO 1641, ISO 222130(CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Fig. 2) Ord. Code: 120518.SET6-20
In stock138,55 € with VAT