Threaded eyes
-
Round thread die UNC - HSS with chip breaker , CZTOOL
Circular thread dies with chip breaker Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
from 11,14 € with VAT -
Round thread die UNF - HSS with chip breaker , CZTOOL
Circular thread dies with chip breaker Thread type: UNF - Unified Fine - American inch thread with fine pitch Climb: in numbers of strokes per inch; UNF - gentle climb Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - High Speed Steel Standard: DIN EN22568, ANSI ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
from 12,96 € with VAT -
Left-sided round thread die W - HSS, VOLKEL
Left threaded die Thread type: Whitworth - BSW (British Standart Whitworth) left Pitch : in numbers of strokes per inch; BSW - basic pitch (rough) Top angle : 55 ° Material : HSS - High speed steel Standard : BS84 / DIN223 / DIN EN22568, replacement PN 8/3211 * Average conversion : 1 "= 25.4mm * Conversion of pitch to millimeters : we do not recommend, it pays to buy thread gauges
from 19,84 € with VAT -
Left-sided round thread die UNC - HSS, VOLKEL
Left threaded die Thread type: UNC - Unified Coarse - American inch thread Climb: in numbers of strokes per inch; UNC - basic climb (rough) Thread tolerance - fitting: medium Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ANSI / ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
from 19,84 € with VAT -
Left-sided round thread die UNF - HSS, VOLKEL
Left threaded die Thread type: UNF - Unified Fine - American inch thread with fine pitch Pitch: in numbers of strokes per inch; UNF - basic pitch (fine) Thread tolerance - fitting: 2A Top angle: 60 ° Material: HSS - high speed steel Standard: DIN EN22568, ANSI / ASME B1.1 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges
from 19,84 € with VAT -
Round thread die NPT - HSS , FANAR
Circular thread dies Thread type: NPT (National Pipe Thread) - American tubular inch thread with conical profile Conicity: 1:16 Pitch: in numbers of turns per inch Top angle: 60 ° Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ANSI / ASME B1.20.1. , DIN24230 Usage: mild structural steels up to 500 N / mm2, free-cutting steels, structural steels and heat-treated steels up to 800 N / mm2, copper alloys, aluminum alloy
from 21,37 € with VAT -
Round thread die NPT - HSS , VOLKEL
Circular thread dies Thread type: NPT (National Pipe Thread) - American tubular inch thread with conical profile Conicity: 1:16 Pitch: in numbers of turns per inch Top angle: 60 ° Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ANSI / ASME B1.20.1. , DIN24230 Usage: mild structural steels up to 500 N / mm2, free-cutting steels, structural steels and heat-treated steels up to 800 N / mm2, copper alloys, aluminum alloy
from 33,60 € with VAT -
Round thread die NPTF - HSS , VOLKEL
Threaded eyelet with jaws for NPTF conical thread (it is a sealing NPT thread without the need to use Teflon tape / glue, etc.) Size: according to the selected variant Ascent: according to the chosen variant Thread taper: 16 Material: HSS - high-speed steel Standard: ASME B1. 20.3 Usage: soft structural steels up to 500 N/mm2, automatic steels, structural steels and refined steels with a strength of up to 800 N/mm2, copper alloys, alloyed aluminum Adjustable design - by tightening the screws in the shaft, it is possible to adjust the diameter of the resulting thread. If you do not overstretch the screws in the beam and tighten only so that the jaw does not fall out of the beam, it works like an ordinary round jaw with a full profile.
48,19 € with VAT -
Round thread die R - HSS ISO-7/1 , CZTOOL
Threaded dies with jaws / threaded jaws Thread type: R or also Rc or BSPT (British Standard Pipe Taper) - tubular inch thread with conical profile Conicity: 1:16 Climb: in numbers of turns per inch Top angle: 55 ° Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ISO-7/1, DIN 24230 Usage: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels
from 16,40 € with VAT -
Adjustable round dies R - HSS DIN2999 , Volkel
Circular adjustable dies Thread type: R or also Rc or BSPT (British Standard Pipe Taper) - tubular inch thread with conical profile Conicity: 1:16 Pitch : in numbers of turns per inch Top angle: 55 ° Form: A Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: DIN 2999, DIN 382 Usage: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels
from 26,96 € with VAT -
Hexagonal threaded jaw R - HSS , CZTOOL
Hexagon thread die / thread die with hexagon jaws Thread type: R or also Rc or BSPT (British Standard Pipe Taper) - tubular inch thread with conical profile Conicity: 1:16 Pitch : in numbers of turns per inch Top angle: 55 ° Form: A Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: DIN 2999, DIN 382 Usage: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels
from 53,69 € with VAT