Thread cutting

Set of machine taps, spiral groove HSSE-PM HL The set includes taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) Tolerance: ISO2 / 6H Material : HSSE-PM (sintered cobalt steel) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Number of lead-in teeth: C (2-3 teeth) Usage - blind hole : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance. Cat. no.: Z4-528M15-0310

Set of machine taps with a spiral groove / set of spiral taps HSSE-PM FAN The set contains taps: M3 / M4 / M5 / M6 / M8 / M10 - according to DIN371 (reinforced shank) M12 - according to DIN376 (" thin shank - common from M12 upwards) Tolerance: ISO2 / 6H Material: HSSE-PM ( sintered cobalt steel) Coating: TiAlSiN Number of lead teeth: C (2-3 teeth) Usage - blind hole: 1.4: Alloy steels, cold drawn tool steel up to 1000N/mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 3.3 : Nodular and tempered cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.3 : Structural and carbon steel, low alloy steel, steel castings up to 1100N/mm2 6.4 : Bronze and aluminum up to 1200N/mm2 7.4 : Aluminum alloys with silicon content Si > 10%, up to 400N/mm2 8.2 : Thermosets and hardened plastics Cat. no.: Z4-565001-0312

Threaded eye left with jaw / threaded eye with jaws Size M 2,3 mm Gradient: 0,4, ie basic M2,3x0,4 LH (2,3x0,4 LH) Tolerance: 6g Metric thread left Outer loop diameter: 16mm CSN EN 22 568 / CSN EN 22568 (CSN 22 3210 / CSN 223210) - Material: HSS - High-speed steel

Threaded eye left with jaw / threaded eye with jaws Size M 11 mm Grip: 1,5, ie basic M11x1,5 LH (11x1,5 LH) Tolerance: 6g Metric thread left Ejector outer diameter: 30mm EN 22 568 / CSN EN 22568 (CS 223210 / CSN 223210) - Material: NO -

Threaded eye with jaw / threaded eye with jaws Size W 3/32" Pitch : 48 z/1" Outer diameter : 20mm Whitworth thread - BSW (British Standar Whitworth) Standard: PN 8/3211 , ČSN 223211 / CSN 22 3211 Material: NO - Tool Steel From above-standard stocks ( stamp. ZONA, SIGMA, ŠKODA, etc.) Unused or only slightly used.

Front / direct sprung lathe holder for round radeco knives - lathe knives with a cylindrical shank Clamping holder diameter: 10mm, securing with an Allen screw Clamping dimensions of the holder: 16x16mm Total length: 168mm Axial height: 7.8mm Square tightening screw: 10x10mm

Front / direct sprung lathe holder for round radeco knives - lathe knives with a cylindrical shank Clamping holder diameter: 15mm, securing with an Allen screw Clamping dimensions of the holder: 25x25mm Total length: 220mm Axis height: 11.8mm Square tightening screw: 12x12mm

Multiholder - frontal / direct sprung lathe holder for round radeco knives - lathe knives with a cylindrical shank The holder clamps diameters: 8mm / 10mm / 15mm, securing with an Allen screw mm / Clamping dimensions of the holder: 25x25mm Total length: 170mm Axial height: 20.5mm Square tightening screws: 8x8mm

Angled / inclined spring-loaded turning holder for round radeco knives - turning knives with a cylindrical shank Clamping holder diameter: 16mm, securing with an Allen screw Clamping dimensions of the holder: 20x20mm Total length: 140mm Axial height: 14.3mm Square tightening screw: 10x10mm

Angled / inclined spring-loaded turning holder for round radeco knives - turning knives with a cylindrical shank Clamping holder diameter: 20mm, securing with an Allen screw Clamping dimensions of the holder: 25x2mm Total length: 170mm Axis height: 18mm Square tightening screw: 12x12mm