Thread cutting

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 6,4 to 9,7 mm Dimensions of the collet (according to the attached photo): D1: 23,9mm D2: 14, 0mm L: 12,7mm A: 40 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. Codes: 9751 or 22200 or TC22200

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 2,3 to 4,6 mm Dimensions of collet (according to enclosed photos): D1: 21,8mm D2: 14, 0mm L: 12,7mm A: 40 ° Number of metal. touch surfaces: 4 Standard: DIN 6345 Ref. Codes: 9751 or 22200 or TC22200

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 7,0 to 13,0 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. Codes: 9749 or 24000 or TC24000

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 4.5 to 9.7 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. codes: 9750 or 24100 or TC24100

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 2.8 to 7.0 mm Dimensions of the collet (according to the attached photo): D1: 30,0mm D2: 19, 0mm L: 15,7mm A: 45 ° Number of metal. touch surfaces: 6 Standard: DIN 6345 Ref. codes: 9867 or 24300 or TC24300

Jakobs rubber clamp for clamping of taper rollers and reamers, used in TAPMATIC, NAREX, VERTEX and KENNAMETAL threading and reaming heads. Clamping range: 1.8 to 4.5 mm Dimensions of the collet (according to the attached photo): D1: 32,9mm D2: 19, 0mm L: 16,0mm A: 45 ° Number of metal. contact surfaces: 6 Standard: DIN 6345

Hand tappet metric Size: M 10 III Material: HSS

Home nut Taps on English thread cyclo Home Size: BSCY 1/4 "x 26 Home Point angle: 60 ° Home Gradient: 26 EAST inch Dimension: l1 - 120mm l2 - 20mm d2 - 4,5mm a - 3,5mm Material: HSS Thread BSCY used in motorcycles made during the war, is still used today.

Nut tap, for English bicycle thread Dimensions: BSCY 5/16 "x 26 Peak angle: 60° Pitch: 26 feet per inch Dimensions: l1 - 78mm l2 - 36mm d2 - 6,3mm a - without square Material: HSS BSCY thread used for motorcycles made during the war, it is still used today.

Dimensions: BSCY 7/16 "x 26 Peak angle: 60 ° Climbing: 26 strokes per inch Dimensions: l1 - 140mm l2 - 20mm d2 - 8mm a - 6,2mm Material: HSS Thread BSCY was used with motorcycles made during the war are still used today.

Left nut tap, for English bicycle plug Size: BSCY 9/16 "x 20 Top angle: 60 Â ° Â ° Pitch: 20 feet per inch Material: HSS < br> The BSCY thread was used in war-made motorcycles, it is still used today.

Matrix screwdriver, for English bicycle thread Size: BSCY 9/16 "x 20 Peak angle: 60A‚ Â ° Pitch: 20 feet per inch Material: HSS Thread BSCY was used in motorcycles made during the war, it is still used today.