Thread cutting
-
Taps and dies
-
Thread milling cutters
-
Shafts, tap attachments, beams
-
Puller taps
-
Thread knives
-
Threads
-
Threaded files
-
JOPO, JOPAL, HERBERT
-
Rolling heads and rolls
-
Tool for cutting external threads on a small lathe, shank 10mm
Clearance saleTool for cutting threads on a small lathe Clamping shank 10mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 10mm, shank length 34mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)
In stock21,25 € with VAT -
Tool for cutting external threads on a small lathe, shank 12mm
Clearance saleTool for cutting threads on a small lathe Clamping shank 12mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 12mm, shank length 24mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)
In stock21,25 € with VAT