Thread cutting

Tool for cutting threads on a small lathe Clamping shank 10mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 10mm, shank length 34mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)

Tool for cutting threads on a small lathe Clamping shank 12mm Designed for cutting external threads(pro screw eye attachment) This is a practical and ready tool for cutting external threads on a lathe. For threaded eyelets with an outer diameter of 25mm. Threads M3-M12 can be cut when using a series of eyelets with an outer diameter of 25mm Dimensions: Total length including clamping shank: 105mm Clamping shank: diameter 12mm, shank length 24mm The hole for turning the threaded eye has a diameter of 25mm and the eye 5 screws on the outer tube Diameter of the outer tube: 30mm. The tube has a serrated surface. Maximum extension / step: 60mm Due to the drilled guide pin, it is possible to thread up to a thread length of 85mm K The adapter can be purchased separately for clamping taps(see related products)

Tap chuck with hexagonal shank with groove for locking in bit holder Range: M3-M8 Clamping shank: classic hexagon 6.3mm Thanks to the groove it is possible to use the chuck on the shank and in the bit adapter with locking.

Tap chuck for battery drill etc. Range: M3-M8 Clamping shank: dia. 6.7mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

Hex Shank Tap Chuck with Groove for Locking in Bit Holder Range: M5-M12 Clamping shank: classic hexagon 6.3mm Thanks to the groove on the shank, the chuck can also be used in the bit adapter with locking.

Tap chuck for cordless drill etc. Range: M5-M12 Clamping shank: dia. 8.8 mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

MINI tap chuck M3-M8 for tap with cylindrical shank(obj. LC 00930 to LC 00931 to LC 2564).

MINI tap holder M5-M12 for tap with cylindrical shank(obj. LC 2564, LC 00930 and LC 00931) code.

screwdriver All supplied in metal binder Material NO: tool steel The color of the package may vary. Weight: 1350g

MK2 cone for clamping Clamping cone: JT 6 Especially for Vertex M2-M8 and M3-M12 die head from our offer Overall length: 108mm Length of clamping part to the die head: 29mm

JT 6JT 6 - parts to die head: 29mm

ČSN 22 3010 / CSN 223010 Metric hand tap M15 III Gauge: 1,5, fine, ie 15x1,5 (M15x1,5) Material: HSS (high-speed steel )