Taps and dies

Cycle Thread Thread 34.7 x 1/24 ", Left Diameter: 34.7mm Gradient: 24 Strokes per inch Overall Length: 45mm Clamping Hole: 13mm Pencil

Thread Cycle Thread Thread 34.7 x 1/24 ", Right Diameter: 34.7mm Gradient: 24 Strokes per inch Overall Length: 45mm Clamping Holes: 13mm Pencil

Plug for plug socket Spindle for socket, 13mm Overall length: 235mm Square: 8,9mm, Square length 12mm Shaft at squares pr. 11mm, shaft length 38mm Dmax: 20mm, length 5mm

Set of disposable taps M3-M12, including drills and beam Set contains: 1) Taps: M3 / M4 / M5 / M6 / M8 / M10 / M12(all HSS-G) 2) Drills: 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm 3) Shaft for taps: size M1 -M12 Tap tolerances: ISO2 / 6H Coating: uncoated Number of lead teeth: 5-7 Application - through hole: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Cat. No .: 910135

Set of quality threaded sockets Range: M3-M12 Tolerance of stitches: 6g Set contains: Jaws: M3, M4, M5, M6, M8, M10 , M12 Eyelet: 25mm (other not needed, stitches are the same diameter) Material: HSS - G - high-speed steel

Hand tappet metric Size: M 10 III Material: HSS

Home nut Taps on English thread cyclo Home Size: BSCY 1/4 "x 26 Home Point angle: 60 ° Home Gradient: 26 EAST inch Dimension: l1 - 120mm l2 - 20mm d2 - 4,5mm a - 3,5mm Material: HSS Thread BSCY used in motorcycles made during the war, is still used today.

Nut tap, for English bicycle thread Dimensions: BSCY 5/16 "x 26 Peak angle: 60° Pitch: 26 feet per inch Dimensions: l1 - 78mm l2 - 36mm d2 - 6,3mm a - without square Material: HSS BSCY thread used for motorcycles made during the war, it is still used today.

Dimensions: BSCY 7/16 "x 26 Peak angle: 60 ° Climbing: 26 strokes per inch Dimensions: l1 - 140mm l2 - 20mm d2 - 8mm a - 6,2mm Material: HSS Thread BSCY was used with motorcycles made during the war are still used today.

Left nut tap, for English bicycle plug Size: BSCY 9/16 "x 20 Top angle: 60 Â ° Â ° Pitch: 20 feet per inch Material: HSS < br> The BSCY thread was used in war-made motorcycles, it is still used today.

Matrix screwdriver, for English bicycle thread Size: BSCY 9/16 "x 20 Peak angle: 60A‚ Â ° Pitch: 20 feet per inch Material: HSS Thread BSCY was used in motorcycles made during the war, it is still used today.

Threaded Eyelet, Threaded Round Jaw Threaded Eyeliner With Jaw / Threaded Eyeliner With Jaws Size: UNC 7/16 (equivalent to 11,112mm) Gradient: 14 Strokes per inch American Whitworth Thread - UNC (Unified Coarse) Mateal: HSS Outer diameter: 30mm