Taps and dies

Adjustable threaded eye with jaw / threaded eye with jaws Size M 4.5 mm Grip: 0.5, ie fine M4.5x0.5 Number of edges: 3 < - Metric Thread Outer Diameter: 20mm BS-1127: 1950 Material: NO - Tool Steel Jaw has adjustable diameter - the wall is open in one place (cut )

Adjustable threaded eye with jaw / threaded eye with jaws Size M 5,5 mm Grip: 0,5, ie fine M5,5x0,5 Number of edges: 4 Metric Thread: Outer OD: 20mm BS-1127: 1950 Material: NO - Tool Steel Jaw has adjustable diameter - the wall is open in one place (cut)

Thread eye with jaw / threaded eye with jaws BSPT Pubular thread conical right Size: R 5/8" Pitch: Taper: 1:16 Ape angle: 55° Outer eye diameter: 55mm Standard: ISO-7/1, DIN 24230 Material: NO - tool steel Use: Well machinable materials up to 600 N/mm2 Non-ferrous metals

Hand set tap G 2 3/4" for pipe thread, the first of the set ( note - the set consists of 3 pcs) Pitch: 11 steps per inch, basic Fit: A Square: 39x39mm Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 NO taps are suitable for threading or piece cutting of threads.

Hand set tap G 3" for pipe thread, the first of the set ( note - the set consists of 3 pcs) Pitch: 11 steps per inch, basic Fit: A Square: 35x35mm Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 NO taps are suitable for threading or piece cutting of threads.

Hand set tap G 3" for pipe thread, the second of the set ( note - the set consists of 3 pcs) Pitch: 11 steps per inch, basic Fit: A Square: 35x35mm Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 NO taps are suitable for threading or piece cutting of threads.

Hand set tap R 2 3/4" for pipe thread, the second of the set ( note - the set consists of 3 pcs) Pitch: 11 steps per inch, basic Fit: A Square: 39x39mm Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 NO taps are suitable for threading or piece cutting of threads.

Metric hand tap M24x1,0 III 0200 Pitch: 1,0, fine, ie 24x1,0(M24x1,0) Fitting: ISO2 / 6H - Grinding thread profile Material: HSS - High speed steel Standard: DIN352(corresponds to A „A’SN 22 3010 / CSN 223010)

Metric hand tap M39 III Gradient: 4.0, basic, ie 39x4,0 (M39x4,0) Facing: ISO2 / 6H - Cut Thread Profile Material: HSS - Rapid Cut Steel Standard: DIN352 (corresponds to ČSN 22 3010 / CSN 223010)

Cycle Thread Thread 34.7 x 1/24 ", Left Diameter: 34.7mm Gradient: 24 Strokes per inch Overall Length: 45mm Clamping Hole: 13mm Pencil

Thread Cycle Thread Thread 34.7 x 1/24 ", Right Diameter: 34.7mm Gradient: 24 Strokes per inch Overall Length: 45mm Clamping Holes: 13mm Pencil

Plug for plug socket Spindle for socket, 13mm Overall length: 235mm Square: 8,9mm, Square length 12mm Shaft at squares pr. 11mm, shaft length 38mm Dmax: 20mm, length 5mm