Taps and dies
-
Machine tap M12 HSSE GAL ISO2(6HX) DIN376 spiral (45°), FANAR
Machine spiral tap( quick cut) M 12, R45 SE 800 Size: M12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 C Thread start: C, 2 steps - see attached photo Materials !L: HSSE( High speed steel 5% Cobalt) Coating: uncoated Helix angle: 45 ° Application: 4.2: Aluminum with silicon content: 1%
In stock23,93 € with VAT -
Machine tap UN 11/16 x 20 HSSE 2B DIN374 spiral (40°) , FANAR
Machine spiral tap ( high-speed ) UN 11/16x20, R40 SE 800 Size: UN 11/16 x 20 Pitch: 20 steps per inch Fit: 2B, ground thread profile Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Coating: no coating Helix angle: 40° Usage: Structural and carbon steel, low alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
On request99,57 € with VAT -
Machine tap 1 1/16 "UNS HSSE DIN374 spiral (40°), FANAR
Machine Spiral Tap( Quick Cut) UNS 1.1 / 16 ", R40 SE 800 Size: UNS 1-1 / 16" Ascent: 14 walk to inch Standard: DIN 374 C Run thread: C, 2 courses - see enclosed photo Material: HSSE( High speed steel 5% Cobalt) Coating: without coating angle helix: 40 Â ° < br> Usage: Construction and carbon steel, low-alloyed steel, cast steel up to 800N / mm2 Brass with long cutting Free-cutting steel, construction and cementing steel Spherical and malleable cast iron Non-alloy and low-alloyed alloys copper Alloys aluminum containing Si
On request139,92 € with VAT -
Machine tap M10 spiral DIN 371 B ISO2 6H HSSE PM HL - DC SWISS
Clearance saleZ362V-3 Stainless Steel Threaded Tap: 1.5 - Basic Facing: ISO2 / 6H - Cut Thread DIN 371 (Reinforced Stopper) Material : HSSE (High-Speed ??Steel 5% Cobalt) Finish: HL (Balinit Hardlube) - High Abrasion Coating 40 ° Hex Groove Color: blue strip Application: Stainless Steel with strength up to 1100 N / mm2 - Blind hole M10
On request21,63 € with VAT -
Machine tap G 1/4 - 19 extended L = 200mm HSS spiral DIN5156, CZTOOL
Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 1/4 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes
On request103,85 € with VAT -
Machine tap G 3/8 - 19 extended L = 200mm HSS spiral DIN5156, CZTOOL
Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 3/8 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes
On request126,94 € with VAT -
Machine tap short M7 HSS ISO2 E(6H) ISO529-D, FANAR
Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: E, 1,5 feed - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2
On request7,56 € with VAT -
Round thread die R 1/4 NO, above standard
Threaded eye with jaws / Threaded eye with jaws Size R 1/4 "(BSPT / Rc 1/4) Rising !N: 19 z / 1 " Pipe thread Outer diameter of the eye: 38mm Standard: Ä ENSN EN 24 231 Corresponds to such © standard 22 3210 Material: NO - Tool Steel Not used from oversupply
In stock5,77 € with VAT -
Set of taps and threaded eyes BSW 1/8 "- 1/2" NO, W 1-II, ČSN 238916 Narex
W 1-II W 1/8 "- W 1/2" Set includes: Taps and eyelets: W 1/8 ", W 3/16", W 1/4 ", W 5/16", W 3/8 ", W 7/16", W 1/2 " Taps for tapping screws adjustable in ranges: 2-4,5mm, 3,55-9mm Wrenches for threaded circular jaws: 25mm and 38mm Inserts for threaded circular jaws: 25 / 20mm and 38 / 30mm Material: NO - tool steel
On request76,88 € with VAT