Straight groove (without breaker)
-
Machine tap M - 4H HSSE CSN 223042 with straight groove, CZTOOL
Machine tap (high speed) straight slot with ground thread profile Fitting: ISO1 / 4H - ground thread profile (tight thread - eg aerospace industry, etc.) Material: HSSE (High speed steel + 5% Cobalt) Standard: CSN 22 3042 (up to M10 reinforced shank, from M12 classic shank) These taps can also be supplied coated (TiN) on request.
from 9,16 € with VAT -
Machine tap M - 6H HSSE DIN with straight groove, CZTOOL
Machine tap( high speed) straight slot with ground thread profile Fitting: ISO2 / 6H - ground thread profile, standard tolerance Material: HSSE( High speed steel 5% Cobalt ) Standard: DIN371 / DIN376 These taps can also be supplied coated on request(TiN)
from 8,99 € with VAT -
Machine tap M5 HSSE ISO2(6H) DIN371 straight slot, NAREX 1000
Clearance saleMachine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips
On request8,76 € with VAT -
Machine tap M3 HSSE ISO2 DIN376, NAREX 3000
Machine tap ( high-speed ) M 3, straight groove Pitch: 0.5, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with a Si content > 10% 10.1 : Copper alloys with a short friable chip
In stock10,74 € with VAT -
Machine tap M8 HSSE ISO2 DIN376, NAREX 3000
Machine tap ( quick-cutting ) M 6, straight groove Pitch: 1.0, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with Si content > 10% 10.1 : Copper alloys with a short friable chip
In stock12,56 € with VAT -
Machine tap M10 HSSE ISO2 DIN376, NAREX 3000
Machine tap ( quick-cutting ) M 10, straight groove Pitch: 1.5, basic Fit: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread lead: C, 2-3 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Usage: 1.2: Non-alloyed cast steels 2.2 : Structural and refined steels 8.1 : Aluminum alloy with Si content < 10% 1.1 : Mild structural steels with strength up to 500 N/mm2 2.1 : Automatic and structural steels with a strength of up to 800 N/mm2 2.3 : Unalloyed cast steels with a strength of up to 800 N/mm2 6.2 : Ductile and malleable cast iron 8.2 : Alloyed aluminum with a Si content > 10% 10.1 : Copper alloys with a short friable chip
On request14,56 € with VAT -
Machine tap short M7 HSS ISO2 B(6H) ISO529-D, FANAR
Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: B, 3-4 feeds - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2
On request5,89 € with VAT -
Machine tap M3.5 HSSE ISO2 C (6H) DIN376 for brass, FANAR
Machine tap (quick-cutting) M 3.5, straight groove Slope: 0.6, basic Fitting: ISO2 / 6H - ground thread profile Standard: DIN 376 Thread start: C, 2 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Grounded thread profile Usage: Brass with a long chip Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
In stock10,87 € with VAT -
Machine tap short M7 HSS ISO2 E(6H) ISO529-D, FANAR
Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: E, 1,5 feed - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2
On request7,68 € with VAT